#ifndef PRONOTIFY_H
#define PRONOTIFY_H
#include <ProToolkit.h>
#include <ProObjects.h>
#include <ProMdl.h>
#include <ProParamval.h>
PRO_BEGIN_C_DECLS
typedef enum pro_notify_type
{
PRO_NOTIFY_NOT_USED = -1,
PRO_NOTIFY_UNASSIGNED = 0,
/* ProMdlSavePreAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_SAVE_PRE
This enum is deprecated. Use PRO_MODEL_SAVE_PRE instead
*/
PRO_MDL_SAVE_PRE = 1,
/* ProMdlSavePostAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_SAVE_POST
This enum is deprecated. Use PRO_MODEL_SAVE_POST instead
*/
PRO_MDL_SAVE_POST = 2,
/* ProMdlSavePostAllAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_SAVE_POST_ALL
This enum is deprecated. Use PRO_MODEL_SAVE_POST_ALL instead
*/
PRO_MDL_SAVE_POST_ALL = 3,
/* ProMdlCopyPreAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_COPY_PRE
This enum is deprecated. Use PRO_MODEL_COPY_PRE instead
*/
PRO_MDL_COPY_PRE = 4,
/* ProMdlCopyPostAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_COPY_POST
This enum is deprecated. Use PRO_MODEL_COPY_POST instead
*/
PRO_MDL_COPY_POST = 5,
/* ProMdlCopyPostAllAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_COPY_POST_ALL
This enum is deprecated. Use PRO_MODEL_COPY_POST_ALL instead
*/
PRO_MDL_COPY_POST_ALL = 6,
/* ProMdlRenamePreAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_RENAME_PRE
This enum is deprecated. Use PRO_MODEL_RENAME_PRE instead
*/
PRO_MDL_RENAME_PRE = 7,
/* ProMdlRenamePostAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_RENAME_POST
This enum is deprecated. Use PRO_MODEL_RENAME_POST instead
*/
PRO_MDL_RENAME_POST = 8,
/* ProMdlErasePreAction */
PRO_MDL_ERASE_PRE = 9,
/* ProMdlErasePostAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_ERASE_POST
This enum is deprecated. Use PRO_MODEL_ERASE_POST instead
*/
PRO_MDL_ERASE_POST = 10,
/* ProMdlErasePostAllAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_ERASE_POST_ALL
This enum is deprecated. Use PRO_MODEL_ERASE_POST_ALL instead
*/
PRO_MDL_ERASE_POST_ALL = 11,
/* ProMdlPurgePreAction
DEPRECATED: Since Creo 10.0
SUCCESSORS: PRO_MODEL_PURGE_PRE
This enum is deprecated. Use PRO_MODEL_PURGE_PRE instead
*/
PRO_MDL_PURGE_PRE = 12,
/* ProMdlPurgePostAction
DEPRECATED: Since Creo 10.0
SUCCESSORS: PRO_MODEL_PURGE_POST
This enum is deprecated. Use PRO_MODEL_PURGE_POST instead
*/
PRO_MDL_PURGE_POST = 13,
/* ProMdlDeletePreAction */
PRO_MDL_DELETE_PRE = 14,
/* ProMdlDeletePostAction
DEPRECATED: Since Creo 10.0
SUCCESSORS: PRO_MODEL_DELETE_POST
This enum is deprecated. Use PRO_MODEL_DELETE_POST instead
*/
PRO_MDL_DELETE_POST = 15,
/* ProMdlDeletePostAllAction
DEPRECATED: Since Creo 10.0
SUCCESSORS: PRO_MODEL_DELETE_POST_ALL
This enum is deprecated. Use PRO_MODEL_DELETE_POST_ALL instead
*/
PRO_MDL_DELETE_POST_ALL = 16,
/* ProMdlRetrievePreAction18 */
PRO_DUMMY_NOTIFY_1 = 17,
/* ProMdlRetrievePostAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_RETRIEVE_POST
This enum is deprecated. Use PRO_MODEL_RETRIEVE_POST instead
*/
PRO_MDL_RETRIEVE_POST = 18,
/* ProMdlRetrievePostAllAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_RETRIEVE_POST_ALL
This enum is deprecated. Use PRO_MODEL_RETRIEVE_POST_ALL instead
*/
PRO_MDL_RETRIEVE_POST_ALL = 19,
/* ProMdlDbmsFailureAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_DBMS_FAILURE
This enum is deprecated. Use PRO_MODEL_DBMS_FAILURE instead
*/
PRO_MDL_DBMS_FAILURE = 20,
/* ProSolidRegeneratePreAction */
PRO_SOLID_REGEN_PRE = 21,
/* ProSolidRegeneratePostAction */
PRO_SOLID_REGEN_POST = 22,
/* ProDirectoryChangePostAction */
PRO_DIRECTORY_CHANGE_POST = 23,
/* ProWindowChangePostAction */
PRO_WINDOW_CHANGE_POST = 24,
/* ProMdlDisplayPreAction */
PRO_MDL_DISPLAY_PRE = 25,
/* ProMdlDisplayPostAction */
PRO_MDL_DISPLAY_POST = 26,
/* ProNcseqClPostAction */
PRO_NCSEQ_CL_POST = 27,
/* ProMfgoperClPostAction */
PRO_MFGOPER_CL_POST = 28,
/* ProFeatureCreatePostAction */
PRO_FEATURE_CREATE_POST = 29,
/* ProFeatureCopyPostAction */
PRO_FEATURE_COPY_POST = 30,
/* ProFeatureDeletePreAction */
PRO_FEATURE_DELETE_PRE = 31,
/* ProFeatureDeletePostAction */
PRO_FEATURE_DELETE_POST = 32,
/* ProFeatureSuppressPreAction */
PRO_FEATURE_SUPPRESS_PRE = 33,
/* ProFeatureSuppressPostAction */
PRO_FEATURE_SUPPRESS_POST = 34,
/* ProFeatureRegenPreAction */
PRO_FEATURE_REGEN_PRE = 35,
/* ProFeatureRegenPostAction */
PRO_FEATURE_REGEN_POST = 36,
/* ProParameterCreatePreAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_PARAM_CREATE_W_UNITS_PRE
This enum is deprecated. Use PRO_PARAM_CREATE_W_UNITS_PRE instead
*/
PRO_PARAM_CREATE_PRE = 37,
/* ProParameterModifyPreAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_PARAM_MODIFY_W_UNITS_PRE
This enum is deprecated. Use PRO_PARAM_MODIFY_W_UNITS_PRE instead
*/
PRO_PARAM_MODIFY_PRE = 38,
/* ProParameterDeletePreAction */
PRO_PARAM_DELETE_PRE = 39,
/* ProMdlCreatePreAction18 */
PRO_DUMMY_NOTIFY_2 = 40,
/* ProMdlCreatePostAction
DEPRECATED: Since Creo 10.0
SUCCESSORS: PRO_MODEL_CREATE_POST
This enum is deprecated. Use PRO_MODEL_CREATE_POST instead
*/
PRO_MDL_CREATE_POST = 41,
/* ProFeatureRegenFailureAction */
PRO_FEATURE_REGEN_FAILURE = 42,
/* ProClCommandExpandAction */
PRO_NCL_COMMAND_EXPAND = 43,
/* ProClCommandGetLocAction */
PRO_NCL_COMMAND_GET_LOC = 44,
/* ProRmdtCreateImmPreAction */
PRO_RMDT_CREATE_IMM_PRE = 45,
/* ProRmdtBoundBoxPreAction */
PRO_RMDT_BOUND_BOX_PRE = 46,
/* ProRmdtCavLayoutPreAction */
PRO_RMDT_CAV_LAYOUT_PRE = 47,
/* ProRmdtCreateWpPreAction */
PRO_RMDT_CREATE_WP_PRE = 48,
/* ProRmdtMaterialPreAction */
PRO_RMDT_MATERIAL_PRE = 49,
/* ProRmdtMBaseSelectPreAction */
PRO_RMDT_MBASE_SELECT_PRE = 50,
/* ProFeatureCreatePreAction */
PRO_FEATURE_CREATE_PRE = 51,
/* ProFeatureRedefinePreAction */
PRO_FEATURE_REDEFINE_PRE = 52,
/* ProFileOpenOKAction
DEPRECATED: Since Creo 10.0
SUCCESSORS: PRO_MODEL_FILE_OPEN_OK
This enum is deprecated. Use PRO_MODEL_FILE_OPEN_OK instead
*/
PRO_FILE_OPEN_OK = 53,
/* ProMdlCreatePreAction
DEPRECATED: Since Creo 10.0
SUCCESSORS: PRO_MODEL_CREATE_PRE
This enum is deprecated. Use PRO_MODEL_CREATE_PRE instead
*/
PRO_MDL_CREATE_PRE = 54,
/* ProMdlRetrievePreAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_MODEL_RETRIEVE_PRE
This enum is deprecated. Use PRO_MODEL_RETRIEVE_PRE instead
*/
PRO_MDL_RETRIEVE_PRE = 55,
/* ProMdlBackupPreAction is obsolete */
PRO_MDL_BACKUP_PRE = 56,
/* ProMdlBackupPostAction is obsolete */
PRO_MDL_BACKUP_POST = 57,
/* ProSolidUnitConvertPreAction */
PRO_SOLID_UNIT_CONVERT_PRE = 58,
/* ProSolidUnitConvertPostAction */
PRO_SOLID_UNIT_CONVERT_POST = 59,
/* ProDrawingWeldSympathGetAction */
PRO_DRAWING_WELD_SYMPATH_GET = 60,
/* ProDrawingWeldGroupsGetAction */
PRO_DRAWING_WELD_GROUPS_GET = 61,
/* ProDrawingWeldSymtextGetAction */
PRO_DRAWING_WELD_SYMTEXT_GET = 62,
/* ProMdlCreateCancelAction */
PRO_MDL_CREATE_CANCEL = 63,
/* ProDimModifyValuePreAction */
PRO_DIM_MODIFY_VALUE_PRE = 64,
/* ProFeatureRedefinePostAction */
PRO_FEATURE_REDEFINE_POST = 65,
/* ProFeatureReroutePreAction */
PRO_FEATURE_REROUTE_PRE = 66,
/* ProFeatureReroutePostAction */
PRO_FEATURE_REROUTE_POST = 67,
/* ProFeatureReplacePreAction */
PRO_FEATURE_REPLACE_PRE = 68,
/* ProFeatureReplacePostAction */
PRO_FEATURE_REPLACE_POST = 69,
/* ProMdlStartAction
DEPRECATED: Since Creo 10.0
SUCCESSORS: PRO_MODEL_START
This enum is deprecated. Use PRO_MODEL_START instead
*/
PRO_MDL_START = 70,
/* ProGlobalInterfCalcPostAction */
PRO_GLOBAL_INTERF_CALC_POST = 71,
/* ProPopupmenuCreatePostAction */
PRO_POPUPMENU_CREATE_POST = 72,
/* ProPopupmenuDestroyPreAction */
PRO_POPUPMENU_DESTROY_PRE = 73,
/* ProAsmcompActivatePreAction */
PRO_ASMCOMP_ACTIVATE_PRE = 74,
/* ProAsmcompActivatePostAction */
PRO_ASMCOMP_ACTIVATE_POST = 75,
/* ProSolidPrincSysUnitsRenamedPostAction */
PRO_SOLID_PRINC_SYS_UNITS_RENAMED_POST = 76,
/* ProGroupUngroupPreAction */
PRO_GROUP_UNGROUP_PRE = 77,
/* ProGroupUngroupPostAction */
PRO_GROUP_UNGROUP_POST = 78,
/* ProUdfLibraryCompletePostAction */
PRO_UDF_LIB_COMPLETE_POST = 79,
/* ProParameterCreatePostAction */
PRO_PARAM_CREATE_POST = 80,
/* ProParameterModifyPostAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_PARAM_MODIFY_W_UNITS_POST
This enum is deprecated. Use PRO_PARAM_MODIFY_W_UNITS_POST instead
*/
PRO_PARAM_MODIFY_POST = 81,
/* ProParameterDeletePostAction
DEPRECATED: Since Creo 3.0
SUCCESSORS: PRO_PARAM_DELETE_W_UNITS_POST
This enum is deprecated. Use PRO_PARAM_DELETE_W_UNITS_POST instead
*/
PRO_PARAM_DELETE_POST = 82 ,
/* ProCheckinUIPreAction */
PRO_CHECKIN_UI_PRE = 83,
/* ProDwgtableDeletePreAction */
PRO_DWGTABLE_DELETE_PRE = 85,
/* ProDwgtableDeletePostAction */
PRO_DWGTABLE_DELETE_POST = 86,
/* ProDwgtableRowDeletePreAction */
PRO_DWGTABLE_ROW_DELETE_PRE = 88,
/* ProDwgtableRowDeletePostAction */
PRO_DWGTABLE_ROW_DELETE_POST = 89,
/* ProWindowOccupyPostAction */
PRO_WINDOW_OCCUPY_POST = 90,
/* ProWindowVacatePreAction */
PRO_WINDOW_VACATE_PRE = 91,
/* ProFeatureNeedsRegenGet
DEPRECATED: Since Creo 8.0
This enum is deprecated.
*/
PRO_FEATURE_NEEDS_REGEN_GET = 92,
/* ProRibbonTabSwitchAction */
PRO_RIBBON_TAB_SWITCH = 94,
/* ProModelSavePostAction */
PRO_MODEL_SAVE_POST = 97,
/* ProModelSavePostAllAction */
PRO_MODEL_SAVE_POST_ALL = 98,
/* ProModelErasePostAllAction */
PRO_MODEL_ERASE_POST_ALL = 99,
/* ProModelRetrievePostAllAction */
PRO_MODEL_RETRIEVE_POST_ALL = 100,
/* ProModelDbmsFailureAction */
PRO_MODEL_DBMS_FAILURE = 101,
/* ProModelRetrievePreAction */
PRO_MODEL_RETRIEVE_PRE = 102,
/* ProModelSavePreAction */
PRO_MODEL_SAVE_PRE = 103,
/* ProModelCopyPreAction */
PRO_MODEL_COPY_PRE = 104,
/* ProModelCopyPostAction */
PRO_MODEL_COPY_POST = 105,
/* ProModelCopyPostAllAction */
PRO_MODEL_COPY_POST_ALL = 106,
/* ProModelRenamePreAction */
PRO_MODEL_RENAME_PRE = 107,
/* ProModelRenamePostAction */
PRO_MODEL_RENAME_POST = 108,
/* ProModelErasePostAction */
PRO_MODEL_ERASE_POST = 109,
/* ProModelRetrievePostAction */
PRO_MODEL_RETRIEVE_POST = 110,
/* ProParameterCreateWithUnitsPreAction */
PRO_PARAM_CREATE_W_UNITS_PRE = 111,
/* ProParameterModifyWithUnitsPreAction */
PRO_PARAM_MODIFY_W_UNITS_PRE = 112,
/* ProParameterModifyWithUnitsPostAction */
PRO_PARAM_MODIFY_W_UNITS_POST = 113,
/* ProParameterDeleteWithUnitsPostAction */
PRO_PARAM_DELETE_W_UNITS_POST = 114,
/* ProModelReplacePostAction */
PRO_MODEL_REPLACE_POST = 117,
/* ProModelSavePreAllAction */
PRO_MODEL_SAVE_PRE_ALL = 118,
/* ProModelRenamePostAllAction */
PRO_MODEL_RENAME_POST_ALL = 122,
/* ProWindowOccupyModelPostAction */
PRO_WINDOW_OCCUPY_MODEL_POST = 124,
/*ProAnsysGetMdlDiffAction*/
PRO_ANSYS_GET_MDL_DIFF = 126, /* Reserved for internal use */
PRO_XSEC_NOTIFY_REGEN_POST = 127, /* Reserved for internal use*/
/*ProModelEmbedExtractPostAction*/
PRO_MODEL_EMBED_EXTRACT_POST = 128,
/*ProSelbufferChangePostAction*/
PRO_SELBUFFER_CHANGE_POST = 129,
/* ProModelPurgePreAction */
PRO_MODEL_PURGE_PRE = 130,
/* ProModelPurgePostAction */
PRO_MODEL_PURGE_POST = 131,
/* ProModelDeletePostAction */
PRO_MODEL_DELETE_POST = 132,
/* ProModelDeletePostAllAction */
PRO_MODEL_DELETE_POST_ALL = 133,
/* ProModelCreatePostAction */
PRO_MODEL_CREATE_POST = 134,
/* ProModelCreatePreAction */
PRO_MODEL_CREATE_PRE = 135,
/* ProModelStartAction */
PRO_MODEL_START = 136,
/* ProModelFileOpenOKAction */
PRO_MODEL_FILE_OPEN_OK = 137
} ProNotifyType;
extern ProError ProNotificationSet ( ProNotifyType type,
ProFunction notify_function);
/*
Purpose: Sets the notification function to be called for the specified
action. NOTE: If you call ProNotificationSet() more than once with
the same event type, the existing callback is overwritten with the
one supplied in the later call.
Input Arguments:
type - The action for which you want to be notified
notify_function - The function to be called for the action
Output Arguments:
none
Return Values:
PRO_TK_NO_ERROR - The function successfully set the function.
PRO_TK_GENERAL_ERROR - There was a general error.
PRO_TK_BAD_INPUTS - One or more of the arguments are invalid.
*/
extern ProError ProNotificationUnset ( ProNotifyType type );
/*
Purpose: Removes the value of the specified notification.
Input Arguments:
type - The notification type
Output Arguments:
none
Return Values:
PRO_TK_NO_ERROR - The function successfully set the function.
PRO_TK_GENERAL_ERROR - There was a general error.
PRO_TK_BAD_INPUTS - The argument is invalid.
*/
typedef ProError (*ProFileOpenOKAction) (ProMdlType mdl_type,
int sub_type,
ProName model_name);
/*
Purpose: <b>Note:</b> This function is deprecated. Use
ProModelFileOpenOKAction instead. This is the notification
function called after the new file has been successfully selected
in Creo Parametric.
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the notify type PRO_FILE_OPEN_OK.
Input Arguments:
mdl_type - The model type (PRO_PART, PRO_ASSEMBLY, and so on)
sub_type - The model subtype
model_name - The model name
Output Arguments:
none
Return Values:
PRO_TK_NO_ERROR - The user specifications are valid. Proceed with model
creation.
Other - The user specifications are invalid. Do not exit the dialog.
*/
typedef ProError (*ProModelFileOpenOKAction) (ProMdlType mdl_type,
ProMdlsubtype sub_type,
ProMdlName model_name);
/*
Purpose: This is the notification function called after the new file has
been successfully selected in Creo Parametric.
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the notify type
PRO_MODEL_FILE_OPEN_OK.
Input Arguments:
mdl_type - The model type (PRO_PART, PRO_ASSEMBLY, and so on)
sub_type - The model subtype
model_name - The model name
Output Arguments:
none
Return Values:
PRO_TK_NO_ERROR - The user specifications are valid. Proceed with model
creation.
Other - The user specifications are invalid. Do not exit the dialog.
*/
typedef ProError (*ProDirectoryChangePostAction) ( ProPath new_path );
/*
Purpose: This is the notification function called after the current
directory has been successfully changed in Creo Parametric.
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the notify type
PRO_DIRECTORY_CHANGE_POST.
Input Arguments:
new_path - The new path to which the directory was changed
Output Arguments:
none
Return Values:
Return Values are not interpreted by Creo Parametric.
See Also:
ProNotificationSet()
*/
typedef ProError (*ProWindowChangePostAction) ( void );
/*
Purpose: This is the notification function called upon successfully
changing the window in Creo Parametric.
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the notify type
PRO_WINDOW_CHANGE_POST.
<p> NOTE:
<p> The functions <b>ProMdlCurrentGet()</b>,
<b>ProWindowCurrentGet()</b>, and <b>ProModeCurrentGet()</b> can
be used in this function.
Input Arguments:
none
Output Arguments:
none
Return Values:
Return values are not interpreted by Creo Parametric.
See Also:
ProMdlCurrentGet()
ProModeCurrentGet()
ProNotificationSet()
ProWindowCurrentGet()
*/
typedef ProError (*ProNcseqClPostAction) (ProMdldata *p_cl_file_info);
/*
Purpose: This is the notification function called upon successful
computation of the NC sequence's toolpath.
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the notify type
PRO_NCSEQ_CL_POST.
Input Arguments:
p_cl_file_info - The information (name, extension, and path) for the CL
file in which the toolpath was written is supplied
through this argument.
Output Arguments:
none
Return Values:
Return values are not interpreted by Creo Parametric.
See Also:
ProNotificationSet()
*/
typedef ProError (*ProMfgoperClPostAction) (ProMdldata *p_cl_file_info);
/*
Purpose: This is the notification function called upon successful
computation of a manufacturing operation's toolpath.
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the notify type
PRO_MFGOPER_CL_POST.
Input Arguments:
p_cl_file_info - The information (name, extension, and path) for the CL
file in which the toolpath was written is supplied
through this argument.
Output Arguments:
none
Return Values:
Return values are not interpreted by Creo Parametric.
See Also:
ProNotificationSet()
*/
typedef ProError (*ProSolidUnitConvertPreAction) (ProSolid solid_handle,
int convert_numbers);
/*
Purpose: This is the notification function called before unit conversion of
a solid.
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the notify type
PRO_UNIT_CONVERT_PRE
Input Arguments:
solid_handle - The handle to the solid about to be converted
convert_numbers - TRUE if quantities are converted, FALSE if quantities
are reinterpreted.
Output Arguments:
none
Return Values:
Return values are not interpreted by Creo Parametric.
See Also:
ProNotificationSet()
*/
typedef ProError (*ProSolidUnitConvertPostAction) (ProSolid solid_handle,
int convert_numbers);
/*
Purpose: This is the notification function called after unit conversion of
a solid.
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the notify type
PRO_UNIT_CONVERT_POST
Input Arguments:
solid_handle - The handle to the solid about to be converted
convert_numbers - TRUE if quantities are converted, FALSE if quantities
are reinterpreted.
Output Arguments:
none
Return Values:
Return values are not interpreted by Creo Parametric.
See Also:
ProNotificationSet()
*/
typedef ProError (*ProMdlCreateCancelAction)( void );
/*
Purpose: This is the notification function called after the new file
creation been cancelled in Creo Parametric.
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the type PRO_MDL_CREATE_CANCEL.
Input Arguments:
none
Output Arguments:
none
Return Values:
PRO_TK_NO_ERROR
*/
typedef ProError (*ProGlobalInterfCalcPostAction) (ProAssembly assembly);
/*
Purpose: This notification is called after a global interference check has
been run on an assembly.
Input Arguments:
assembly - The assembly where the interference check was run.
Output Arguments:
none
Return Values:
Return values are not interpreted by Creo Parametric.
*/
typedef ProError (*ProSolidPrincSysUnitsRenamedPostAction) (ProSolid solid_handle,
ProName old_name,
ProName new_name);
/*
Purpose: This is the notification function called after principal system of
units was renamed
<p> This function is to be supplied by the user by calling
<b>ProNotificationSet()</b> with the notify type
PRO_SOLID_PRINC_SYS_UNITS_RENAMED_POST
Input Arguments:
solid_handle - The handle to the solid about to be converted
old_name - Old name of principal system of units
new_name - New name of principal system of units
Output Arguments:
none
Return Values:
Return values are not interpreted by Creo Parametric.
See Also:
ProNotificationSet()
*/
typedef ProError (*ProCheckinUIPreAction) ( void );
/*
Purpose: This is the function prototype that will be called when the user
has just selected File->Auto Checkin, File->Custom Checkin, or the
corresponding menu choices on the Model Tree menu. It is called
before any of the actions executed by this button take place.
Input Arguments:
none
Output Arguments:
none
Return Values:
PRO_TK_NO_ERROR - Continue checking in.
Any other value - Cancel the checkin activity. The application is
responsible for informing the user why the action was
cancelled.
*/
typedef ProError (*ProRibbonTabSwitchAction) ( char *from_tab, char *to_tab );
/*
Purpose: This is the notification function called when switching from one
ribbon tab to another
<p> Users must supply this function by calling
<b>ProNotificationSet()</b> with the notify type
PRO_RIBBON_TAB_SWITCH.
Input Arguments:
from_tab - Name of the ribbon tab switching from.
to_tab - Name of the ribbon tab switching to.
Output Arguments:
none
Return Values:
Must return PRO_TK_NO_ERROR.
See Also:
ProNotificationSet()
*/
PRO_END_C_DECLS
#endif /* PRONOTIFY_H */