#ifndef PROMFGFEATTURNING_H
#define PROMFGFEATTURNING_H
/*
Creo Parametric TOOLKIT declarations related to mfg turning sequences:
- area turning;
- profile turning;
- groove turning.
*/
#include <ProToolkit.h>
PRO_BEGIN_C_DECLS
/*============================================================================
(1) Feature element tree
PRO_E_FEATURE_TREE
|
|-- PRO_E_FEATURE_TYPE
|
|-- PRO_E_STD_FEATURE_NAME
|
|-- PRO_E_NCSEQ_TYPE
|
|-- PRO_E_MFG_OPER_REF
|
|-- PRO_E_NCSEQ_CSYS
|
|-- PRO_E_MFG_SUB_SPINDLE_OPT
|
|-- PRO_E_MFG_TOOL_REF_COMPOUND
|
|-- PRO_E_MFG_PARAM_SITE_NAME
|
|-- PRO_E_MFG_PARAM_ARR
|
|-- PRO_E_TOOL_MTN_ARR
| |
| |-- PRO_E_TOOL_MTN
|
|-- PRO_E_MFG_START_PNT
|
|-- PRO_E_MFG_END_PNT
|
|-- PRO_E_MFG_PREREQUISITE_ARR
|
|-- PRO_E_MFG_PROCESS_REF
|
|-- PRO_E_MFG_FEAT_VIEW_NAME
|
|-- PRO_E_MFG_SIMP_REP_NAME
|
|-- PRO_E_MFG_TIME_ESTIMATE
|
|-- PRO_E_MFG_COST_ESTIMATE
|
|-- PRO_E_MFG_TIME_ACTUAL
|
|-- PRO_E_MFG_COMMENTS
===============================================================================
(2) Feature elements table
-------------------------------------------------------------------------------------------
Element Id Element Name Data Type Valid Values
-------------------------------------------------------------------------------------------
PRO_E_FEATURE_TYPE Feature Type PRO_VALUE_TYPE_INT Note-1
PRO_E_STD_FEATURE_NAME Feature Name PRO_VALUE_TYPE_WSTRING Note-2
PRO_E_NCSEQ_TYPE Sequence Type PRO_VALUE_TYPE_INT Note-3
PRO_E_MFG_OPER_REF Operation PRO_VALUE_TYPE_SELECTION Note-4
PRO_E_NCSEQ_CSYS Sequence Csys PRO_VALUE_TYPE_SELECTION Note-5
PRO_E_MFG_TOOL_REF_COMPOUND Tool Compound Note-6
PRO_E_MFG_PARAM_SITE_NAME Site Name PRO_VALUE_TYPE_WSTRING Note-7
PRO_E_MFG_PARAM_ARR Mfg Parameter Array Array Note-8
PRO_E_TOOL_MTN_ARR Tool Motion Array Array Note-9
PRO_E_TOOL_MTN Tool Motion Compound Note-10
PRO_E_MFG_START_PNT Start Point PRO_VALUE_TYPE_SELECTION Note-11
PRO_E_MFG_END_PNT End Point PRO_VALUE_TYPE_SELECTION Note-12
PRO_E_MFG_PREREQUISITE_ARR Prerequisite Array Array Note-13
PRO_E_MFG_PROCESS_REF Process Reference PRO_VALUE_TYPE_SELECTION Note-14
PRO_E_MFG_FEAT_VIEW_NAME View Name PRO_VALUE_TYPE_WSTRING Note-15
PRO_E_MFG_SIMP_REP_NAME Simp Rep Name PRO_VALUE_TYPE_WSTRING Note-16
PRO_E_MFG_TIME_ESTIMATE Time Estimate PRO_VALUE_TYPE_DOUBLE Note-17
PRO_E_MFG_COST_ESTIMATE Cost Estimate PRO_VALUE_TYPE_DOUBLE Note-18
PRO_E_MFG_TIME_ACTUAL Actual Time PRO_VALUE_TYPE_DOUBLE Note-19
PRO_E_MFG_COMMENTS Comments PRO_VALUE_TYPE_WSTRING Note-20
PRO_E_MFG_SUB_SPINDLE_OPT Sub-spindle Option PRO_VALUE_TYPE_INT Note-21
===============================================================================
(3) Notes
Note-1 : PRO_FEAT_TURN
Mandatory.
Note-2 : Sequence feature name.
Optional.
Note-3 : PRO_NCSEQ_AREA_TURN - for an area turning sequence,
PRO_NCSEQ_GROOVE_TURN - for a groove turning sequence,
PRO_NCSEQ_PROF_TURN - for a profile turning sequence,
Mandatory.
Note-4 : Operation feature selection.
Mandatory.
Note-5 : Coordinate system datum feature. To be used as a sequence coordinate
system.
Mandatory.
Note-6 : Tool reference compound definition.
Please see ProMfgElemToolRef.h.
Mandatory.
Note-7 : Name of site with default values for manufacturing parameters.
Name is going to be ignored if site doesn't exist in the mfg model.
Optional.
Note-8 : Array of manufacturing parameters.
Please see ProMfgElemParam.h.
Mandatory.
Note-9 : Array of tool motions.
Optional.
Note-10 : Tool motion compound specification. Optional.
Applicable tool motion types:
PRO_TM_TYPE_AREA_TURNING (for an area turning sequence, please see ProMfgElemToolMtnAreaTurn.h)
PRO_TM_TYPE_GROOVE_TURNING (for a groove turning sequence, please see ProMfgElemToolMtnGrooveTurn.h)
PRO_TM_TYPE_PROF_TURNING (for a profile turning sequence, please see ProMfgElemToolMtnProfTurn.h)
PRO_TM_TYPE_FOLLOW_CUT (please see ProMfgElemToolMtnFollowCut.h)
PRO_TM_TYPE_FOLLOW_CURVE (please see ProMfgElemToolMtnFollowCrv.h)
PRO_TM_TYPE_GOTO_POINT (please see ProMfgElemToolMtnGotoPnt.h)
PRO_TM_TYPE_GO_DELTA (please see ProMfgElemToolMtnGoDelta.h)
PRO_TM_TYPE_GOHOME (please see ProMfgElemToolMtnGoHome.h)
PRO_TM_TYPE_TANGENT_APPROACH (please see ProMfgElemToolMtnTanAppr.h)
PRO_TM_TYPE_TANGENT_EXIT (please see ProMfgElemToolMtnTanExit.h)
PRO_TM_TYPE_NORMAL_APPROACH (please see ProMfgElemToolMtnNormAppr.h)
PRO_TM_TYPE_NORMAL_EXIT (please see ProMfgElemToolMtnNormExit.h)
PRO_TM_TYPE_LEAD_IN (please see ProMfgElemToolMtnLeadIn.h)
PRO_TM_TYPE_LEAD_OUT (please see ProMfgElemToolMtnLeadOut.h)
PRO_TM_TYPE_RAMP_APPROACH (please see ProMfgElemToolMtnRampAppr.h)
PRO_TM_TYPE_RAMP_EXIT (please see ProMfgElemToolMtnRampExit.h)
PRO_TM_TYPE_CONNECT (please see ProMfgElemToolMtnConnect.h)
PRO_TM_TYPE_CL_COMMAND (please see ProMfgElemToolMtnClCmd.h)
Follow Cut motion must be placed just after Area/Groove/Profile Turning motions
or another Follow Cut motion.
Note-11 : Datum point selection. Allows to start machining at the specified
position.
Optional.
Note-12 : Datum point selection. Allows to end machining at the specified
position.
Optional.
Note-13 : Array of ids of prerequisite sequences. For information purpose only.
Please see ProMfgElemPrerequisite.h.
Optional.
Note-14 : Reference selections (part, feature, curve, surface, edge,
datum plane, axis, point, datum csys). Allows to create
additional geometry references to be used only in special process
application.
Element supports multiple selections.
Optional.
Note-15 : View name. Allows to associate specific view with a machining step.
Used only in special process application.
Optional.
Note-16 : Simplified representation name. Allows to associate specific
simplified representation with a machining step.
Used only in special process application.
Optional.
Note-17 : Time estimate. Allows to specify time estimate for the
machining step.
Used only in special process application.
Optional.
Note-18 : Cost estimate. Allows to specify cost estimate for the
machining step.
Used only in special process application.
Optional.
Note-19 : Actual time. Allows to specify actual time for the machining step.
Used only in special process application.
Optional.
Note-20 : Sequence comments.
Note-21 : Type of spindle assigned to the sequence.
Values are defined by ProSubSpindleOpt.
Optional (if not defined - PRO_MFG_MAIN_SPINDLE is set
by default)
=============================================================================*/
PRO_END_C_DECLS
#endif /* PROMFGFEATTURNING_H */