#ifndef PROMFGFEATHOLEMAKING_H
#define PROMFGFEATHOLEMAKING_H
/*
Creo Parametric TOOLKIT declarations related to mfg holemaking sequences:
- drilling;
- web drilling;
- countersining;
- counterboring;
- reaming;
- tapping;
- custom cycle holemaking;
- face holemaking.
*/
#include <ProToolkit.h>
PRO_BEGIN_C_DECLS
/*============================================================================
(1) Feature element tree
PRO_E_FEATURE_TREE
|
|-- PRO_E_FEATURE_TYPE
|
|-- PRO_E_STD_FEATURE_NAME
|
|-- PRO_E_NCSEQ_TYPE
|
|-- PRO_E_HOLEMAKING_TYPE
|
|-- PRO_E_DRILL_MODE
|
|-- PRO_E_MFG_OPER_REF
|
|-- PRO_E_MFG_HOLEMAKING_CYCLE_TYPE
|
|-- PRO_E_MFG_SEQ_NUM_AXES_OPT
|
|-- PRO_E_NCSEQ_CSYS
|
|-- PRO_E_RETR_SURF
|
|-- PRO_E_MFG_SUB_SPINDLE_OPT
|
|-- PRO_E_MFG_TOOL_REF_COMPOUND
|
|-- PRO_E_MFG_TOOL_ADAPTER_NAME
|
|-- PRO_E_MFG_PARAM_SITE_NAME
|
|-- PRO_E_MFG_PARAM_ARR
|
|-- PRO_E_MFG_CUSTOM_CYCLE_NAME
|
|-- PRO_E_HOLESETS
|
|-- PRO_E_CHECK_SURF_COLL
|
|-- PRO_E_TOOL_MTN_ARR
| |
| |-- PRO_E_TOOL_MTN
|
|-- PRO_E_MFG_START_PNT
|
|-- PRO_E_MFG_END_PNT
|
|-- PRO_E_MFG_PREREQUISITE_ARR
|
|-- PRO_E_MFG_PROCESS_REF
|
|-- PRO_E_MFG_FEAT_VIEW_NAME
|
|-- PRO_E_MFG_SIMP_REP_NAME
|
|-- PRO_E_MFG_TIME_ESTIMATE
|
|-- PRO_E_MFG_COST_ESTIMATE
|
|-- PRO_E_MFG_TIME_ACTUAL
|
|-- PRO_E_MFG_COMMENTS
===============================================================================
(2) Elements table
-------------------------------------------------------------------------------------------
Element Id Element Name Data Type Valid Values
-------------------------------------------------------------------------------------------
PRO_E_FEATURE_TYPE Feature Type PRO_VALUE_TYPE_INT Note-1
PRO_E_STD_FEATURE_NAME Feature Name PRO_VALUE_TYPE_WSTRING Note-2
PRO_E_NCSEQ_TYPE Sequence Type PRO_VALUE_TYPE_INT Note-3
PRO_E_HOLEMAKING_TYPE Holemaking Type PRO_VALUE_TYPE_INT Note-4
PRO_E_DRILL_MODE Drill Mode PRO_VALUE_TYPE_INT Note-5
PRO_E_MFG_OPER_REF Operation PRO_VALUE_TYPE_SELECTION Note-6
PRO_E_MFG_HOLEMAKING_CYCLE_TYPE Cycle Type PRO_VALUE_TYPE_INT Note-7
PRO_E_MFG_SEQ_NUM_AXES_OPT Number of Axes PRO_VALUE_TYPE_INT Note-8
PRO_E_NCSEQ_CSYS Sequence Csys PRO_VALUE_TYPE_SELECTION Note-9
PRO_E_RETR_SURF Retract Surface Compound Note-10
PRO_E_MFG_TOOL_REF_COMPOUND Tool Compound Note-11
PRO_E_MFG_TOOL_ADAPTER_NAME Tool Attachment PRO_VALUE_TYPE_WSTRING Note-12
PRO_E_MFG_PARAM_SITE_NAME Site Name PRO_VALUE_TYPE_WSTRING Note-13
PRO_E_MFG_PARAM_ARR Mfg Parameter Array Array Note-14
PRO_E_MFG_CUSTOM_CYCLE_NAME Custom Cycle Name PRO_VALUE_TYPE_WSTRING Note-15
PRO_E_HOLESETS Holeset Array Array Note-16
PRO_E_CHECK_SURF_COLL Check Surfaces PRO_VALUE_TYPE_SELECTION Note-17
PRO_E_TOOL_MTN_ARR Tool Motion Array Array Note-18
PRO_E_TOOL_MTN Tool Motion Compound Note-19
PRO_E_MFG_START_PNT Start Point PRO_VALUE_TYPE_SELECTION Note-20
PRO_E_MFG_END_PNT End Point PRO_VALUE_TYPE_SELECTION Note-21
PRO_E_MFG_PREREQUISITE_ARR Prerequisite Array Array Note-22
PRO_E_MFG_PROCESS_REF Process Reference PRO_VALUE_TYPE_SELECTION Note-23
PRO_E_MFG_FEAT_VIEW_NAME View Name PRO_VALUE_TYPE_WSTRING Note-24
PRO_E_MFG_SIMP_REP_NAME Simp Rep Name PRO_VALUE_TYPE_WSTRING Note-25
PRO_E_MFG_TIME_ESTIMATE Time Estimate PRO_VALUE_TYPE_DOUBLE Note-26
PRO_E_MFG_COST_ESTIMATE Cost Estimate PRO_VALUE_TYPE_DOUBLE Note-27
PRO_E_MFG_TIME_ACTUAL Actual Time PRO_VALUE_TYPE_DOUBLE Note-28
PRO_E_MFG_COMMENTS Comments PRO_VALUE_TYPE_WSTRING Note-29
PRO_E_MFG_SUB_SPINDLE_OPT Sub-spindle Option PRO_VALUE_TYPE_INT Note-30
===============================================================================
(3) Notes
Note-1 : PRO_FEAT_DRILL
Mandatory.
Note-2 : Sequence feature name.
Optional.
Note-3 : PRO_NCSEQ_HOLEMAKING
Mandatory.
Note-4 : Type of holemaking sequence.
Values defined by ProHolemakingType.
Mandatory.
Note-5 : Holemaking mode - machining with rotating part or rotating tool.
Values defined by ProDrillModeOption.
Mandatory for drilling on mill-turn work center.
Note-6 : Operation feature selection.
Mandatory.
Note-7 : Holemaking cycle type.
Values defined by ProHmCycleType.
Mandatory for drilling, tapping, counterboring, countersinking.
For countersinking should be set to PRO_HM_CYCLE_TYPE_STANDARD.
Ignored for other types of holemaking.
Note-8 : 3 or 5. Can be set to 5 only if work center allows 5-axis
machining.
Note-9 : Coordinate system datum feature. To be used as a sequence coordinate
system.
Mandatory.
Note-10 : Retract compound definition.
Please see ProMfgElemRetract.h.
Mandatory when PRO_E_DRILL_MODE set to PRO_DRILL_HOLE_ON_MILL.
Ignored when PRO_E_DRILL_MODE set to PRO_DRILL_HOLE_ON_LATHE.
Note-11 : Tool reference compound definition.
Please see ProMfgElemToolRef.h.
Mandatory.
Note-12 : Tool adapter model name.
Optional.
Note-13 : Name of site with default values for manufacturing parameters.
Name is going to be ignored if site doesn't exist in the mfg model.
Optional.
Note-14 : Array of manufacturing parameters.
Please see ProMfgElemParam.h.
Mandatory.
Note-15 : Name of custom cycle which will be used to define machining strategy.
A custom cycle with speified name must exists in mfg model.
Mandatory for custom cycle holemaking (when PRO_E_HOLEMAKING_TYPE is
not set to PRO_HOLE_MK_CUSTOM). Ignored for other types of
holemaking.
Note-16 : Array of holesets - specification of holes to machine.
Please see ProMfgElemHoleset.h
Mandatory.
Note-17 : Check surfaces compound definition.
Please see ProMfgElemCheckSurf.h.
Optional.
Note-18 : Array of tool motions.
Optional.
Note-19 : Tool motion compound specification. Optional.
Applicable tool motion types:
PRO_TM_TYPE_AUTOMATIC_CUT (please see ProMfgElemToolMtnAutoCut.h)
PRO_TM_TYPE_GOTO_POINT (please see ProMfgElemToolMtnGotoPnt.h)
PRO_TM_TYPE_GO_DELTA (please see ProMfgElemToolMtnGoDelta.h)
PRO_TM_TYPE_GOHOME (please see ProMfgElemToolMtnGoHome.h)
PRO_TM_TYPE_GO_RETRACT (please see ProMfgElemToolMtnGoRetr.h)
PRO_TM_TYPE_CONNECT (please see ProMfgElemToolMtnConnect.h)
PRO_TM_TYPE_CL_COMMAND (please see ProMfgElemToolMtnClCmd.h)
Note-20 : Datum point selection. Allows to start machining at the specified
position.
Optional.
Note-21 : Datum point selection. Allows to end machining at the specified
position.
Optional.
Note-22 : Array of ids of prerequisite sequences. For information purpose only.
Please see ProMfgElemPrerequisite.h.
Optional.
Note-23 : Reference selections (part, feature, curve, surface, edge,
datum plane, axis, point, datum csys). Allows to create
additional geometry references to be used only in special process
application.
Element supports multiple selections.
Optional.
Note-24 : View name. Allows to associate specific view with a machining step.
Used only in special process application.
Optional.
Note-25 : Simplified representation name. Allows to associate specific
simplified representation with a machining step.
Used only in special process application.
Optional.
Note-26 : Time estimate. Allows to specify time estimate for the
machining step.
Used only in special process application.
Optional.
Note-27 : Cost estimate. Allows to specify cost estimate for the
machining step.
Used only in special process application.
Optional.
Note-28 : Actual time. Allows to specify actual time for the machining step.
Used only in special process application.
Optional.
Note-29 : Sequence comments.
Note-30 : Type of spindle assigned to the sequence.
Values are defined by ProSubSpindleOpt.
Optional (if not defined - PRO_MFG_MAIN_SPINDLE is set
by default)
=============================================================================*/
PRO_END_C_DECLS
#endif /* PROMFGFEATHOLEMAKING_H */