#ifndef PROMFGELEMHOLESET_H
#define PROMFGELEMHOLESET_H
/*
Creo Parametric TOOLKIT declarations related to mfg holemaking holeset
*/
#include <ProToolkit.h>
#include <ProMfgOptions.h>
PRO_BEGIN_C_DECLS
/*============================================================================
(1) Element tree
-- PRO_E_HOLESETS
|
|-- PRO_E_HOLESET
|
|-- PRO_E_HOLESET_ID
|
|-- PRO_E_HOLESET_TYPE
|
|-- PRO_E_HOLESET_START
| |
| |--PRO_E_HOLESET_START_TYPE
| |
| |--PRO_E_HOLESET_START_SURFACE
| |
| |--PRO_E_HOLESET_START_Z_OFFSET
|
|-- PRO_E_HOLESET_END
| |
| |--PRO_E_HOLESET_END_TYPE
| |
| |--PRO_E_HOLESET_END_MEASURE_BY
| |
| |--PRO_E_HOLESET_END_SURFACE
| |
| |--PRO_E_HOLESET_DEPTH_VALUE
| |
| |--PRO_E_HOLESET_END_Z_OFFSET
| |
| |--PRO_E_HOLESET_CSINK_DIAM
| |
| |--PRO_E_HOLESET_USE_BRKOUT_DIST
|
|-- PRO_E_HOLESET_DEPTH
| |
| |--PRO_E_HOLESET_DEPTH_TYPE
| |
| |--PRO_E_HOLESET_DEPTH_BY_TYPE
| |
| |--PRO_E_HOLESET_DEPTH_PLATES
| |
| |--PRO_E_HOLESET_DEPTH_PLATE
| |
| |--PRO_E_HOLESET_PLATE_START
| |
| |--PRO_E_HOLESET_PLATE_END_OPT
| |
| |--PRO_E_HOLESET_PLATE_END
| |
| |--PRO_E_HOLESET_PLATE_DEPTH
| |
| |--PRO_E_HOLESET_PLATE_BRKOUT
|
|-- PRO_E_HOLESET_CUSTOM_CYCLE_PLATES
| |
| |--PRO_E_HOLESET_CUSTOM_CYCLE_REFERENCES
| | |
| | |--PRO_E_HOLESET_CUSTOM_CYCLE_REF
| | |
| | |--PRO_E_MFG_CUST_CYCLE_PLATE_NAME
| | |
| | |--PRO_E_HOLESET_CUSTOM_CYCLE_REF_OPT
| | |
| | |--PRO_E_HOLESET_CUSTOM_CYCLE_REF_SEL
| | |
| | |--PRO_E_HOLESET_CUSTOM_CYCLE_REF_Z_OFFSET
| | |
| | |--PRO_E_HOLESET_CUSTOM_CYCLE_REF_DEPTH
| |
| |--PRO_E_HOLESET_CUSTOM_CYCLE_VARIABLES
| |
| |--PRO_E_HOLESET_CUSTOM_CYCLE_VAR
| |
| |--PRO_E_MFG_CUST_CYCLE_VAR_NAME
| |
| |--PRO_E_HOLESET_CUSTOM_CYCLE_VAR_VALUE
|
|-- PRO_E_DRILL_PART_DATA
| |
| |--PRO_E_AUTO_SEL_DRILL_PARTS
| |
| |--PRO_E_DRILL_PARTS
|
|-- PRO_E_AUTODRILL_INFO
| |
| |--PRO_E_HOLESET_AUTODRILL_REF_INDEX
| |
| |--PRO_E_AUTODRILL_DEPTH_BY_TABLE
|
|-- PRO_E_HOLESET_ORIENT_TYPE
|
|-- PRO_E_HOLESET_ORIENT_REF
|
|-- PRO_E_HOLESET_TIP_CTRL_PNT
|
|-- PRO_E_HOLESET_SELECTION_RULES
| |
| |--PRO_E_HOLESET_SEL_PNTS_ON_SURFACES
| |
| |--PRO_E_HOLESET_SEL_PNTS_BY_FEATURE
| |
| |--PRO_E_HOLESET_SEL_PROJECT_SURFACES
| |
| |--PRO_E_HOLESET_SEL_MAX_PROJECT_DIST
| |
| |--PRO_E_HOLESET_SEL_UNSEL_PNTS
| |
| |--PRO_E_HOLESET_SEL_INDIV_PNTS
| |
| |--PRO_E_HOLESET_SEL_AUTO_CHAMFER
| |
| |--PRO_E_HOLESET_SEL_AXIS_PATTS
| |
| |--PRO_E_MFG_HSET_DRILL_GROUP_REF
| |
| |--PRO_E_HOLESET_SEL_BY_SURFACES
| |
| |--PRO_E_MFG_HSET_DIAM_TYPE_OPT
| |
| |--PRO_E_MFG_HSET_DIAM_ARR
| | |
| | |--PRO_E_MFG_HSET_DIAM_COMPOUND
| | |
| | |--PRO_E_MFG_HSET_HOLE_DIAM
| |
| |--PRO_E_MFG_HSET_PARAM_RULE_OPT
| |
| |--PRO_E_MFG_HSET_PARAM_ARR
| | |
| | |--PRO_E_MFG_HSET_PARAM_COMPOUND
| | |
| | |--PRO_E_MFG_HSET_PARAM_NAME
| | |
| | |--PRO_E_MFG_HSET_PARAM_DTYPE
| | |
| | |--PRO_E_MFG_HSET_PARAM_OPER
| | |
| | |--PRO_E_MFG_HSET_PARAM_VAL_DBL
| | |
| | |--PRO_E_MFG_HSET_PARAM_VAL_INT
| | |
| | |--PRO_E_MFG_HSET_PARAM_VAL_STR
| | |
| | |--PRO_E_MFG_HSET_PARAM_VAL_BOOL
| |
| |--PRO_E_HOLESET_SEL_UNSEL_AXES
| |
| |--PRO_E_HOLESET_SEL_INDIV_AXES
| |
| |--PRO_E_HOLESET_SEL_UNSEL_GEOMETRY
| |
| |--PRO_E_HOLESET_SEL_INDIV_GEOMETRY
|
|-- PRO_E_MFG_HSET_START_HOLE_REF
|
|-- PRO_E_HOLESET_UNFLIPPED_AXES
|
|-- PRO_E_HOLESET_FLIPPED_AXES
|
|-- PRO_E_HOLESET_GANG_TOOL_INFO
|
|--PRO_E_HSET_GANG_TOOL_PARENT_ID
|
|--PRO_E_HSET_IS_GANG_TOOL_LEADER
===============================================================================
(2) Elements table
--------------------------------------------------------------------------------------------------
Element Id Element Name Data Type Valid Value
--------------------------------------------------------------------------------------------------
PRO_E_HOLESETS Holeset Array Array Note-1
PRO_E_HOLESET Holeset Compound Note-2
PRO_E_HOLESET_ID Holeset Id PRO_VALUE_TYPE_INT Note-3
PRO_E_HOLESET_TYPE Holeset Type PRO_VALUE_TYPE_INT Note-4
PRO_E_HOLESET_START Holeset Start Compound Note-5
PRO_E_HOLESET_START_TYPE Start Type PRO_VALUE_TYPE_INT Note-6
PRO_E_HOLESET_START_SURFACE Start Surface PRO_VALUE_TYPE_SELECTION Note-7
PRO_E_HOLESET_END Holeset End Compound Note-8
PRO_E_HOLESET_END_TYPE Depth Type Option PRO_VALUE_TYPE_INT Note-9
PRO_E_HOLESET_END_MEASURE_BY Measure By Option PRO_VALUE_TYPE_INT Note-10
PRO_E_HOLESET_END_SURFACE End Surface PRO_VALUE_TYPE_SELECTION Note-11
PRO_E_HOLESET_DEPTH_VALUE Depth Value PRO_VALUE_TYPE_DOUBLE Note-12
PRO_E_HOLESET_CSINK_DIAM Countersink Diameter PRO_VALUE_TYPE_DOUBLE Note-13
PRO_E_HOLESET_USE_BRKOUT_DIST Breakout Distance PRO_VALUE_TYPE_DOUBLE Note-14
PRO_E_HOLESET_DEPTH Holeset Depth Compound Note-15
PRO_E_HOLESET_DEPTH_TYPE Depth Type PRO_VALUE_TYPE_INT Note-16
PRO_E_HOLESET_DEPTH_BY_TYPE Depth By Type PRO_VALUE_TYPE_INT Note-17
PRO_E_HOLESET_DEPTH_PLATES Holeset Plates Array Note-18
PRO_E_HOLESET_DEPTH_PLATE Plate Compound Note-19
PRO_E_HOLESET_PLATE_START Plate Start Surface PRO_VALUE_TYPE_SELECTION Note-20
PRO_E_HOLESET_PLATE_END_OPT Plate End Type PRO_VALUE_TYPE_INT Note-21
PRO_E_HOLESET_PLATE_END Plate End Surface PRO_VALUE_TYPE_SELECTION Note-22
PRO_E_HOLESET_PLATE_DEPTH Plate Depth Offset PRO_VALUE_TYPE_DOUBLE Note-23
PRO_E_HOLESET_PLATE_BRKOUT Plate Breakout Value PRO_VALUE_TYPE_DOUBLE Note-24
PRO_E_HOLESET_CUSTOM_CYCLE_PLATES Custom Cycle Plates Compound Note-25
PRO_E_HOLESET_CUSTOM_CYCLE_REFERENCES Cycle References Array Note-26
PRO_E_HOLESET_CUSTOM_CYCLE_REF Cycle Ref Compound Compound Note-27
PRO_E_MFG_CUST_CYCLE_PLATE_NAME Cycle Plate Name Compound Note-28
PRO_E_HOLESET_CUSTOM_CYCLE_REF_OPT Cycle Ref Type PRO_VALUE_TYPE_INT Note-29
PRO_E_HOLESET_CUSTOM_CYCLE_REF_SEL Cycle Reference PRO_VALUE_TYPE_SELECTION Note-30
PRO_E_HOLESET_CUSTOM_CYCLE_REF_Z_OFFSET Cycle Offset PRO_VALUE_TYPE_DOUBLE Note-31
PRO_E_HOLESET_CUSTOM_CYCLE_VARIABLES Cycle Variables Array Note-32
PRO_E_HOLESET_CUSTOM_CYCLE_VAR Cycle Variable Compound Note-33
PRO_E_MFG_CUST_CYCLE_VAR_NAME Variable Name PRO_VALUE_TYPE_WSTRING Note-34
PRO_E_HOLESET_CUSTOM_CYCLE_VAR_VALUE Variable Value PRO_VALUE_TYPE_DOUBLE Note-35
PRO_E_DRILL_PART_DATA Part Data Compound Note-36
PRO_E_AUTO_SEL_DRILL_PARTS Auto Option PRO_VALUE_TYPE_INT Note-37
PRO_E_DRILL_PARTS Parts PRO_VALUE_TYPE_SELECTION Note-38
PRO_E_HOLESET_SELECTION_RULES Holes Compound Compound Note-39
PRO_E_HOLESET_SEL_PNTS_ON_SURFACES Points Surface PRO_VALUE_TYPE_SELECTION Note-40
PRO_E_HOLESET_SEL_PNTS_BY_FEATURE Point Features PRO_VALUE_TYPE_SELECTION Note-41
PRO_E_HOLESET_SEL_PROJECT_SURFACES Points Proj Surface PRO_VALUE_TYPE_SELECTION Note-42
PRO_E_HOLESET_SEL_MAX_PROJECT_DIST Max Proj Dist PRO_VALUE_TYPE_DOUBLE Note-43
PRO_E_HOLESET_SEL_UNSEL_PNTS Excluded Points PRO_VALUE_TYPE_SELECTION Note-44
PRO_E_HOLESET_SEL_INDIV_PNTS Individual Points PRO_VALUE_TYPE_SELECTION Note-45
PRO_E_HOLESET_SEL_AUTO_CHAMFER Auto Chamfer PRO_VALUE_TYPE_INT Note-46
PRO_E_HOLESET_SEL_AXIS_PATTS Patterns PRO_VALUE_TYPE_SELECTION Note-47
PRO_E_MFG_HSET_DRILL_GROUP_REF Drill Groups PRO_VALUE_TYPE_SELECTION Note-48
PRO_E_HOLESET_SEL_BY_SURFACES Surfaces with holes PRO_VALUE_TYPE_SELECTION Note-49
PRO_E_MFG_HSET_DIAM_ARR Diameter Array Array Note-50
PRO_E_MFG_HSET_DIAM_COMPOUND Diameter Compound Compound Note-51
PRO_E_MFG_HSET_HOLE_DIAM Diameter PRO_VALUE_TYPE_DOUBLE Note-52
PRO_E_MFG_HSET_PARAM_ARR Parameter Array Array Note-53
PRO_E_MFG_HSET_PARAM_COMPOUND Parameter Compound Compound Note-54
PRO_E_MFG_HSET_PARAM_NAME Parameter Name PRO_VALUE_TYPE_WSTRING Note-55
PRO_E_MFG_HSET_PARAM_DTYPE Data Type PRO_VALUE_TYPE_INT Note-56
PRO_E_MFG_HSET_PARAM_OPER Operator PRO_VALUE_TYPE_INT Note-57
PRO_E_MFG_HSET_PARAM_VAL_DBL Double Value PRO_VALUE_TYPE_DOUBLE Note-58
PRO_E_MFG_HSET_PARAM_VAL_INT Integer Value PRO_VALUE_TYPE_INT Note-59
PRO_E_MFG_HSET_PARAM_VAL_STR String Value PRO_VALUE_TYPE_WSTRING Note-60
PRO_E_MFG_HSET_PARAM_VAL_BOOL Boolean Value PRO_VALUE_TYPE_INT Note-61
PRO_E_HOLESET_SEL_UNSEL_AXES Excluded Axes PRO_VALUE_TYPE_SELECTION Note-62
PRO_E_HOLESET_SEL_INDIV_AXES Individual Axes PRO_VALUE_TYPE_SELECTION Note-63
PRO_E_HOLESET_SEL_UNSEL_GEOMETRY Excluded Holes PRO_VALUE_TYPE_SELECTION Note-64
PRO_E_HOLESET_SEL_INDIV_GEOMETRY Individual Holes PRO_VALUE_TYPE_SELECTION Note-65
PRO_E_HOLESET_TIP_CTRL_PNT Tool Tip Number PRO_VALUE_TYPE_INT Note-66
PRO_E_MFG_HSET_START_HOLE_REF Start Hole PRO_VALUE_TYPE_SELECTION Note-67
PRO_E_HOLESET_UNFLIPPED_AXES Unflipped Axes PRO_VALUE_TYPE_SELECTION Note-68
PRO_E_HOLESET_FLIPPED_AXES Flipped Axes PRO_VALUE_TYPE_SELECTION Note-69
PRO_E_HOLESET_ORIENT_TYPE Orientation Type PRO_VALUE_TYPE_INT Note-70
PRO_E_HOLESET_ORIENT_REF Orient Reference PRO_VALUE_TYPE_SELECTION Note-71
PRO_E_HOLESET_START_Z_OFFSET Start Z Offset PRO_VALUE_TYPE_DOUBLE Note-72
PRO_E_HOLESET_END_Z_OFFSET End Z Offset PRO_VALUE_TYPE_DOUBLE Note-73
PRO_E_HOLESET_CUSTOM_CYCLE_REF_DEPTH Cust Cycle Ref Depth PRO_VALUE_TYPE_DOUBLE Note-74
PRO_E_AUTODRILL_INFO Autodrill Compound Compound Note-75
PRO_E_HOLESET_AUTODRILL_REF_INDEX Autodrill Ref Index PRO_VALUE_TYPE_INT Note-76
PRO_E_AUTODRILL_DEPTH_BY_TABLE Autodrill Depth Type PRO_VALUE_TYPE_INT Note-77
PRO_E_HOLESET_GANG_TOOL_INFO Gang Tool Info Compound Note-78
PRO_E_HSET_GANG_TOOL_PARENT_ID Gang Tool Parent Id PRO_VALUE_TYPE_INT Note-79
PRO_E_HSET_IS_GANG_TOOL_LEADER Gang Tool Leader Opt PRO_VALUE_TYPE_INT Note-80
PRO_E_MFG_HSET_DIAM_TYPE_OPT Diameter Types PRO_VALUE_TYPE_INT Note-81
PRO_E_MFG_HSET_PARAM_RULE_OPT Parameter Rule Opt PRO_VALUE_TYPE_INT Note-82
===============================================================================
(3) Notes
Note-1 : Array of holesets - specification of machining references.
Note-2 : Holeset definition.
Mandatory (holeset array should have at least one member).
Note-3 : Holeset id.
Internal use only. Should not be added or modified.
Note-4 : Holeset type - axes or points.
Values defined by ProHolesetType.
Mandatory.
Note-5 : Holemaking start compound specification.
Ignored for web drilling. Mandatory for other types of holemaking.
Note-6 : Start surface option.
Values defined by ProDrillStartType.
Ignored for web drilling and counersinking (when
PRO_E_HOLEMAKING_TYPE is set to PRO_HOLE_MK_CSINK or
PRO_HOLE_MK_WEB). Mandatory for other types of holemaking.
Note-7 : Starting surface or quilt selection.
For countersink it is optional if auto_chamfer rule is set and there
is no explicit axes selection.
For web drilling it is ignored. For other holemaking types it is
mandatory if PRO_E_HOLESET_START_TYPE is set to
PRO_DRILL_FROM_SURFACE.
Note-8 : Holemaking depth compound specification.
Ignored for web drilling. Mandatory for other types of holemaking.
Note-9 : End type option.
Values defined by ProDrillEndType.
Ignored for counersinking. Mandatory for other types of holemaking.
Note-10 : Depth calculation option - tip/shoulder.
Values defined by ProDrillDepthByType.
Ignored for counersinking and web drilling.
Mandatory for other types of holemaking.
Note-11 : End surface or quilt selection.
Ignored for countersinking and web drilling.
Ignored for custom drilling if cycle definition does not use end
surface.
Mandatory if PRO_E_HOLESET_END_TYPE is set to
PRO_DRILL_UPTO_SURFACE. Ignored in all other cases.
Note-12 : Depth to drill from start.
Mandatory if PRO_E_HOLESET_END_TYPE is set to
PRO_DRILL_OFFSET_FROM_START. Ignored in all other cases.
Note-13 : Countersink diameter.
Mandatory for countersink sequence (when PRO_E_HOLEMAKING_TYPE is
set to PRO_HOLE_MK_CSINK). Ignored in all other cases.
Note-14 : Depth breakout option.
Ignored if end_type is PRO_DRILL_THRU_ALL_PARTS or
PRO_DRILL_AUTO_END.
TRUE - to drill an additional BREAKOUT_DISTANCE (manufacturing
parameter) deeper.
FALSE - do not drill deeper than defined by depth specification.
Optional. Ignored for countersink sequences.
Note-15 : Web drilling depth compound specification.
Mandatory for web drilling. Ignored for other types of holemaking.
Note-16 : Web drilling depth type option - blind/auto/through.
Values defined by ProDrillDepthType.
Mandatory for web drilling. Ignored for other types of holemaking.
Note-17 : Web drilling depth calculation option - tip/shoulder.
Values defined by ProDrillDepthByType.
Mandatory for web drilling. Ignored for other types of holemaking.
Note-18 : Array of web drilling plates.
Mandatory for web drilling. Ignored for other types of holemaking.
Note-19 : Web drilling plate definition.
Mandatory (at least one plate should be defiined in array of plates).
Note-20 : Web drilling plate starting surface or quilt selection.
Mandatory if PRO_E_HOLESET_DEPTH_TYPE is set to PRO_DRILL_BLIND.
Ignored in all other cases.
Note-21 : Web drilling plate depth type option.
Values defined by ProDrillEndType.
Mandatory for web drilling. Ignored for other types of holemaking.
Note-22 : Web drilling plate end surface or quilt selection.
Mandatory for web drilling if PRO_E_HOLESET_PLATE_END_OPT is set to
PRO_DRILL_UPTO_SURFACE. Ignored in all other cases.
Note-23 : Web drilling depth from plate start.
Mandatory for web drilling if PRO_E_HOLESET_PLATE_END_OPT is set to
PRO_DRILL_OFFSET_FROM_START. Ignored in all other cases.
Note-24 : Web drilling depth breakout option.
TRUE - to drill an additional BREAKOUT_DISTANCE (manufacturing
parameter) deeper.
FALSE - do not drill deeper than defined by depth specification.
Optional. Ignored for countersink sequences.
Note-25 : Compound definition of custom cycle.
Mandatory for custom cycle holemaking. Ignored for other types of
holemaking.
Note-26 : Array of custom cycle references.
Number of members in array should match with number of references in
custom cycle definition (stored in mfg model).
Mandatory if references are used in the custom cycle definition(see
PRO_E_MFG_CUSTOM_CYCLE_NAME).
Note-27 : Compound definition of a custom cycle reference.
Mandatory for custom cycle with references.
Note-28 : Name of custom cycle reference.
Mandatory for reference definition.
Note-29 : Type of reference specification.
Values defined by ProCustomRefOption.
Mandatory for reference definition.
Note-30 : Custom cycle reference surface or quilt selection.
Mandatory if PRO_E_HOLESET_CUSTOM_CYCLE_REF_OPT is set to
PRO_CUSTOM_DRILL_SELECT_REFERENCE. Ignored in all other cases.
Note-31 : Custom cycle reference specification by offset value from sequence
csys origin.
Mandatory if PRO_E_HOLESET_CUSTOM_CYCLE_REF_OPT is set to
PRO_CUSTOM_DRILL_OFFSET_FROM_CSYS. Ignored in all other cases.
Note-32 : Array of custom cycle variables.
Number of members in array should match with number of variables in
custom cycle definition (stored in mfg model).
Mandatory if variables are used in named custom cycle (see
PRO_E_MFG_CUSTOM_CYCLE_NAME).
Note-33 : Compound definition of a custom cycle variable.
Mandatory for custom cycle with variables.
Note-34 : Name of custom cycle variable.
Mandatory for variable definition.
Note-35 : Custom cycle variable value.
Mandatory for variable definition.
Note-36 : Compound information about components used in depth computation.
Mandatory if start or end of machining has to be
computed - either (1) or (2) or (3):
(1). PRO_E_HOLESET_START_TYPE is set to PRO_DRILL_AUTO_START.
(2). PRO_E_HOLESET_END_TYPE is set to PRO_DRILL_AUTO or
PRO_DRILL_THRU_ALL
(3). PRO_E_HOLESET_DEPTH_TYPE is set to PRO_DRILL_AUTO or
PRO_DRILL_THRU_ALL
Note-37 : Option defines the way components are collected.
TRUE - all components of type "reference part" or "workpiece"
are considered for depth calculation.
FALSE - Only selected components are considered in depth calculation.
Mandatory.
Note-38 : Components selections.
Element supports multiple selections.
Mandatory if PRO_E_AUTO_SEL_DRILL_PARTS is set to FALSE.
Ignored if PRO_E_AUTO_SEL_DRILL_PARTS is set to FALSE.
Note-39 : Compound information about location of holes to drill.
Mandatory. At least one of the following children elements
has to be defined:
PRO_E_HOLESET_SEL_PNTS_ON_SURFACES,
PRO_E_HOLESET_SEL_INDIV_PNTS,
PRO_E_HOLESET_SEL_PNTS_BY_FEATURE,
PRO_E_HOLESET_SEL_AUTO_CHAMFER,
PRO_E_HOLESET_SEL_INDIV_AXES,
PRO_E_HOLESET_SEL_AXIS_PATTS,
PRO_E_MFG_HSET_DRILL_GROUP_REF,
PRO_E_HOLESET_SEL_BY_SURFACES,
PRO_E_MFG_HSET_DIAM_ARR,
PRO_E_MFG_HSET_PARAM_ARR.
Note-40 : Selection of surfaces (or quilts) with points.
Element supports multiple selections.
Optional for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Ignored for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Note-41 : Selection of datum point features.
Element supports multiple selections.
Optional for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Ignored for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES)
Note-42 : Selection of surfaces/quilts.
Element supports multiple selections.
Mandatory for five-axis holemaking (PRO_E_MFG_SEQ_NUM_AXES_OPT is
set to 5) if at least one point selection is set for one of the
following elements:
PRO_E_HOLESET_SEL_INDIV_PNTS,
PRO_E_HOLESET_SEL_PNTS_BY_FEATURE.
Only points placed on selected surface will be considered for
machining in the direction normal to the surface (at the location
defined by the point).
Ignored for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Note-43 : Accuracy used to determine whether a point lies on a surface.
Mandatory for five-axis holemaking (PRO_E_MFG_SEQ_NUM_AXES_OPT is
set to 5) if at least one point selection is set for one of the
following elements:
PRO_E_HOLESET_SEL_INDIV_PNTS,
PRO_E_HOLESET_SEL_PNTS_BY_FEATURE.
Only points placed on selected surface will be considered for
machining in the direction normal to the surface (at the location
defined by the point).
Ignored for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Note-44 : Selection of points for holes to be excluded for machining.
Element supports multiple selections.
Optional for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Ignored for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Note-45 : Selection of points.
Element supports multiple selections.
Mandatory for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS) if none of the following elements is
defined:
PRO_E_HOLESET_SEL_PNTS_ON_SURFACES,
PRO_E_HOLESET_SEL_PNTS_BY_FEATURE.
Ignored for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES)
Note-46 : Auto chamfer option.
Ignored for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS)
Optional for countersinking. Ignored for other types of holemaking.
TRUE - collect holes with chamfers matching chamfer angle with
angle of cutting tool (see PRO_E_MFG_TOOL_REF_COMPOUND for
tool reference).
FALSE - do not collect holes by chamfer dimensions.
Note-47 : Selection of axes of patterned holes.
Element supports multiple selections.
If a pattern leader is selected, all holes in pattern
will be collected.
Optional for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Ignored for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Note-48 : Selection of drill group features.
Element supports multiple selections.
Optional for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Ignored for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Note-49 : Selection of surfaces (or quilts) with holes.
Element supports multiple selections.
Optional for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Ignored for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Note-50 : Array of diameters of holes to machine.
Optional for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Ignored for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Note-51 : Compound definition of a hole diameter.
Optional for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Ignored for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Note-52 : Diameter of a hole to machine.
Mandatory child of PRO_E_MFG_HSET_DIAM_COMPOUND element.
Note-53 : Array of search conditions to collect holes to machine.
Optional for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Ignored for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Note-54 : Compound definition of a condition to match with hole features
user defined parameters.
Each condition defines expression with user defined parameter
name on the left side of the expression and value to compare on
the right side.
Optional for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Ignored for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Note-55 : Name of user defined parameter.
Mandatory child of PRO_E_MFG_HSET_PARAM_COMPOUND element.
Note-56 : Data type of value.
Values defined by ProParamvalueType.
Mandatory child of PRO_E_MFG_HSET_PARAM_COMPOUND element.
Note-57 : Type of expression operator.
Values defined by ProDrillParamOper.
Mandatory child of PRO_E_MFG_HSET_PARAM_COMPOUND element.
Note-58 : Value of type double.
Mandatory child of PRO_E_MFG_HSET_PARAM_COMPOUND element
for double data type (PRO_E_MFG_HSET_PARAM_DTYPE is set to
PRO_PARAM_DOUBLE). Ignored for other data types.
Note-59 : Value of type integer.
Mandatory child of PRO_E_MFG_HSET_PARAM_COMPOUND element
for integer data type (PRO_E_MFG_HSET_PARAM_DTYPE is set to
PRO_PARAM_INTEGER). Ignored for other data types.
Note-60 : Value of type string.
Mandatory child of PRO_E_MFG_HSET_PARAM_COMPOUND element
for integer data type (PRO_E_MFG_HSET_PARAM_DTYPE is set to
PRO_PARAM_STRING). Ignored for other data types.
Note-61 : Value of type ProBoolean.
Mandatory child of PRO_E_MFG_HSET_PARAM_COMPOUND element
for integer data type (PRO_E_MFG_HSET_PARAM_DTYPE is set to
PRO_PARAM_BOOLEAN). Ignored for other data types.
Note-62 : Selection of axes of holes to be excluded for machining.
Element supports multiple selections.
Optional for axes holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_AXES).
Ignored for points holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_POINTS).
Note-63 : Selection of datum axes.
Element supports multiple selections.
Mandatory for geometry holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_GEOM) if none of the following elements is
defined:
PRO_E_HOLESET_SEL_AUTO_CHAMFER,
PRO_E_HOLESET_SEL_AXIS_PATTS,
PRO_E_MFG_HSET_DRILL_GROUP_REF,
PRO_E_HOLESET_SEL_BY_SURFACES,
PRO_E_MFG_HSET_DIAM_ARR,
PRO_E_MFG_HSET_PARAM_ARR.
Ignored for points holeset and geometry holeset.
Note-64 : Selection of holes to be excluded for machining.
Element supports multiple selections.
Optional for geometry holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_GEOM).
Ignored for points holeset and axes holeset.
Note-65 : Selection of Holes.
Element supports multiple selections.
Mandatory for geometry holeset (PRO_E_HOLESET_TYPE is set to
PRO_HOLESET_DRILL_GEOMETRY) if none of the following elements is
defined:
PRO_E_HOLESET_SEL_AUTO_CHAMFER,
PRO_E_HOLESET_SEL_BY_SURFACES,
PRO_E_MFG_HSET_DIAM_ARR.
Ignored for points holeset and axis holeset.
Note-66 : Cutting tool control tip number - defines point on the cutting tool
to be controlled during machining of the holeset.
Optional. First point of the tool will be used in element doesn't
exist.
Note-67 : Axis selection (for axes holeset) or point selection (for points
holeset) for the hole to be drilled first.
Optional.
Note-68 : Axis selections for holes that should be drilled as per orientation
of the axis entities.
Element supports multiple selections.
For 5-axis holemaking the system will attempt (usually
successfully) to determine the appropriate machining approach
directions for all selected axes whose approach direction is not
specified by these elements. These elements therefore usually
do not need to be specified.
Optional for axes holeset for 5-axis holemaking. Ignored in all
other cases.
Note-69 : Axis selections for holes that should be drilled in the direction
opposite to the orientation of the axis entities.
Element supports multiple selections.
For 5-axis holemaking the system will attempt (usually
successfully) to determine the appropriate machining approach
directions for all selected axes whose approach direction is not
specified by these elements. These elements therefore usually
do not need to be specified.
Optional for axes holeset for 5-axis holemaking. Ignored in all
other cases.
Note-70 : Machining direction option for 5-axis holemaking - away/toward the
selected reference.
Values defined by ProDrillOrientType.
Optional for axes holeset for 5-axis holemaking. Ignored in all
other cases.
Note-71 : Single reference selection (surface, point, axis) to define
direction of machining for 5-axis holemaking. System will determine
direction of machining relatively to the selected reference (away
from the reference if PRO_E_HOLESET_ORIENT_TYPE is set to
PRO_DRILL_ORIENT_TO_REF, or toward the refernce if it is set to
PRO_DRILL_ORIENT_FROM_REF).
Optional for axes holeset for 5-axis holemaking. Ignored in all
other cases.
Note-72 : Drilling will start at this offset from sequence csys origin.
Mandatory if PRO_E_HOLESET_START_TYPE is set to
PRO_DRILL_START_OFFSET_FROM_CSYS. Ignored in all other cases.
Note-73 : Drilling will end at this offset from sequence csys origin.
Mandatory if PRO_E_HOLESET_END_TYPE is set to
PRO_DRILL_END_OFFSET_FROM_CSYS. Ignored in all other cases.
Note-74 : Custom cycle reference specification by offset value from start
surface.
Mandatory if PRO_E_HOLESET_CUSTOM_CYCLE_REF_OPT is set to
PRO_CUSTOM_DRILL_OFFSET_FROM_START. Ignored in all other cases.
Note-75 : Autodrilling information.
Mandatory for autodrilling holesets.
Note-76 : Internal Use Only
Note-77 : For autodrilling holesets.
TRUE: Read depth information from autodrilling table.
FALSE: Take depth information from holeset definition.
Mandatory for autodrilling holesets.
Note-78 : Compound specification of gang tool properties.
Optional
Note-79 : Parent step id.
Mandatory for gang tool specification.
Note-80 : TRUE - Holeset is a leader of the gang tool.
FALSE - Holeset is not a leader of the gang tool.
Mandatory for gang tool specification.
Note-81 : Type of diameters collected in PRO_E_MFG_HSET_DIAM_ARR.
Ignored for points holeset and geometry holeset.
Values defined by ProHolesetDiamType.
PRO_HSET_ALL_DIAMS - all diameter, including diameters of
solid surfaces and diameters of
cosmetic threads.
PRO_HSET_HOLE_DIAMS - diameters of solid surfaces.
PRO_HSET_THREAD_DIAMS - diameters of cosmetic threads.
Optional (PRO_HSET_ALL_DIAMS is used if the element is not defined).
Note-82 : Type of query applied for search.
Ignored for points holeset.
Values defined by ProHsetParamRuleOpt.
PRO_HSET_BOOL_OPER_OR - Collects holes with at least one parameter.
PRO_HSET_BOOL_OPER_AND - Collect holes with with combination of all
parameters.
Optional (PRO_HSET_BOOL_OPER_OR is used if the element is not
defined).
=============================================================================*/
PRO_END_C_DECLS
#endif /* PROMFGELEMHOLESET_H */