#ifndef PRODTMPNT
#define PRODTMPNT
/*
Creo Parametric TOOLKIT declarations related to datum point feature
*/
#include <ProToolkit.h>
PRO_BEGIN_C_DECLS
typedef enum Pro_DPoint_Type
{
PRO_DPOINT_TYPE_GENERAL = -1,
PRO_DPOINT_TYPE_OFFSET_CSYS = 6,
PRO_DPOINT_TYPE_FIELD = 21,
PRO_DPOINT_TYPE_SKETCHED = 22
} ProDPointType;
typedef enum pro_dtmpnt_constr_type
{
PRO_DTMPNT_CONSTR_TYPE_NONE = -1,
PRO_DTMPNT_CONSTR_TYPE_ON = 0,
PRO_DTMPNT_CONSTR_TYPE_OFFSET = 1,
PRO_DTMPNT_CONSTR_TYPE_CENTER = 2,
PRO_DTMPNT_CONSTR_TYPE_NORMAL = 3,
PRO_DTMPNT_CONSTR_TYPE_PARALLEL = 4,
PRO_DTMPNT_CONSTR_TYPE_LENGTH = 5, /* Length From Start */
PRO_DTMPNT_CONSTR_TYPE_LENGTH_END = 6, /* Length From End */
PRO_DTMPNT_CONSTR_TYPE_RATIO = 7, /* Ratio From Start */
PRO_DTMPNT_CONSTR_TYPE_RATIO_END = 8, /* Ratio From End */
PRO_DTMPNT_CONSTR_TYPE_ALONG_X = 9,
PRO_DTMPNT_CONSTR_TYPE_ALONG_Y = 10,
PRO_DTMPNT_CONSTR_TYPE_ALONG_Z = 11,
PRO_DTMPNT_CONSTR_TYPE_CARTESIAN = 12,
PRO_DTMPNT_CONSTR_TYPE_CYLINDRICAL = 13,
PRO_DTMPNT_CONSTR_TYPE_SPHERICAL = 14,
PRO_DTMPNT_CONSTR_TYPE_PROJECT = 15
} ProDtmpntConstrType;
typedef enum pro_dtmpnt_offcsys_type
{
PRO_DTMPNT_OFFCSYS_CARTESIAN = 0,
PRO_DTMPNT_OFFCSYS_CYLINDRICAL = 2,
PRO_DTMPNT_OFFCSYS_SPHERICAL = 4
} ProDtmpntOffCsysType;
/* ***************************************************************************
################################################################################
############################# SKETCHED DATUM POINT #############################
################################################################################
Note: The element tree below is only meant for querying purposes.
Sketched Datum Points migrated to Sketched Curve feature
starting with Wildfire 5, so users should employ the element tree of
Sketched Curve feature in ProDtmCrv.h for creating new sketched datum points.
================================================================================
Element Id Element Name Data Type
================================================================================
|--PRO_E_FEATURE_TYPE Feature Type PRO_VALUE_TYPE_INT
|--PRO_E_DPOINT_TYPE Datum Point Type PRO_VALUE_TYPE_INT
|--PRO_E_STD_FEATURE_NAME Feature Name PRO_VALUE_TYPE_WSTRING
|--PRO_E_STD_SECTION Section Compound
================================================================================
================================================================================
Element Id Valid Values
================================================================================
PRO_E_FEATURE_TYPE PRO_FEAT_DATUM_POINT
PRO_E_DPOINT_TYPE PRO_DPOINT_TYPE_SKETCHED
PRO_E_STD_SECTION see ProStdSection.h
================================================================================
The following sub-elements of PRO_E_STD_SECTION must be defined to
complete feature:
|--PRO_E_STD_SECTION
|--PRO_E_STD_SEC_SETUP_PLANE
|--PRO_E_STD_SEC_PLANE
|--PRO_E_STD_SEC_PLANE_VIEW_DIR
|--PRO_E_STD_SEC_PLANE_ORIENT_DIR
|--PRO_E_STD_SEC_PLANE_ORIENT_REF
|--PRO_E_SKETCHER
################################################################################
############################# FIELD DATUM POINT ##############################
################################################################################
================================================================================
Element Id Element Name Data Type
================================================================================
|--PRO_E_FEATURE_TYPE Feature Type PRO_VALUE_TYPE_INT
|--PRO_E_DPOINT_TYPE Datum Point Type PRO_VALUE_TYPE_INT
|--PRO_E_STD_FEATURE_NAME Feature Name PRO_VALUE_TYPE_WSTRING
|--PRO_E_DPOINT_FIELD_REF Placement Reference PRO_VALUE_TYPE_SELECTION
================================================================================
================================================================================
Element Id Valid Values
================================================================================
PRO_E_FEATURE_TYPE PRO_FEAT_DATUM_POINT
PRO_E_DPOINT_TYPE PRO_DPOINT_TYPE_FIELD
PRO_E_DPOINT_FIELD_REF Surface / Edge / Curve / Quilt.
Note: UV is used to specify exact location.
================================================================================
################################################################################
########################### OFFSET CSYS DATUM POINT ############################
################################################################################
|--PRO_E_FEATURE_TYPE
|
|--PRO_E_DPOINT_TYPE
|
|--PRO_E_STD_FEATURE_NAME
|
|--PRO_E_DPOINT_OFST_CSYS_TYPE
|
|--PRO_E_DPOINT_OFST_CSYS_REF
|
|--PRO_E_DPOINT_OFST_CSYS_WITH_DIMS
|
|--PRO_E_DPOINT_OFST_CSYS_PNTS_ARRAY (Array of points within DP feature)
|--PRO_E_DPOINT_OFST_CSYS_PNT
|--PRO_E_DPOINT_OFST_CSYS_PNT_NAME
|--PRO_E_DPOINT_OFST_CSYS_DIR1_VAL
|--PRO_E_DPOINT_OFST_CSYS_DIR2_VAL
|--PRO_E_DPOINT_OFST_CSYS_DIR3_VAL
================================================================================
================================================================================
Element Id Element Name Data Type
================================================================================
PRO_E_FEATURE_TYPE Feature Type PRO_VALUE_TYPE_INT
PRO_E_DPOINT_TYPE Datum Point Type PRO_VALUE_TYPE_INT
PRO_E_STD_FEATURE_NAME Feature Name PRO_VALUE_TYPE_WSTRING
PRO_E_DPOINT_OFST_CSYS_TYPE Reference Csys Type PRO_VALUE_TYPE_INT
PRO_E_DPOINT_OFST_CSYS_REF Reference Csys PRO_VALUE_TYPE_SELECTION
PRO_E_DPOINT_OFST_CSYS_WITH_DIMS Parametric/Explicit PRO_VALUE_TYPE_INT
with or without dims.
PRO_E_DPOINT_OFST_CSYS_PNTS_ARRAY Points List Array
PRO_E_DPOINT_OFST_CSYS_PNT One Point Compound
PRO_E_DPOINT_OFST_CSYS_PNT_NAME Point Name PRO_VALUE_TYPE_WSTRING
PRO_E_DPOINT_OFST_CSYS_DIR1_VAL X / R / RHO PRO_VALUE_TYPE_DOUBLE
PRO_E_DPOINT_OFST_CSYS_DIR2_VAL Y / THETA / PHI PRO_VALUE_TYPE_DOUBLE
PRO_E_DPOINT_OFST_CSYS_DIR3_VAL Z / Z / THETA PRO_VALUE_TYPE_DOUBLE
================================================================================
================================================================================
Element Id Valid Values
================================================================================
PRO_E_FEATURE_TYPE PRO_FEAT_DATUM_POINT
PRO_E_DPOINT_TYPE PRO_DPOINT_TYPE_OFFSET_CSYS
PRO_E_DPOINT_OFST_CSYS_TYPE see ProDtmpntOffCsysType
PRO_E_DPOINT_OFST_CSYS_REF Csys
PRO_E_DPOINT_OFST_CSYS_WITH_DIMS PRO_B_TRUE or PRO_B_FALSE
PRO_E_DPOINT_OFST_CSYS_DIR1_VAL Depend on PRO_E_DPOINT_OFST_CSYS_TYPE
PRO_E_DPOINT_OFST_CSYS_DIR2_VAL Depend on PRO_E_DPOINT_OFST_CSYS_TYPE
PRO_E_DPOINT_OFST_CSYS_DIR3_VAL Depend on PRO_E_DPOINT_OFST_CSYS_TYPE
================================================================================
################################################################################
############################# GENERAL DATUM POINT ##############################
################################################################################
|--PRO_E_FEATURE_TYPE
|
|--PRO_E_DPOINT_TYPE
|
|--PRO_E_STD_FEATURE_NAME
|
|--PRO_E_DPOINT_POINTS_ARRAY (Array of points within DP feature)
| |--PRO_E_DPOINT_POINT
| |--PRO_E_DPOINT_POINT_NAME
| |--PRO_E_DPOINT_PLA_CONSTRAINTS (Array of placement constraints )
| |--PRO_E_DPOINT_PLA_CONSTRAINT
| |--PRO_E_DPOINT_PLA_CONSTR_REF
| |--PRO_E_DPOINT_PLA_CONSTR_TYPE
| |--PRO_E_DPOINT_PLA_CONSTR_VAL
| |--PRO_E_DPOINT_DIM_CONSTRAINTS (Array of dimension constraints )
| |--PRO_E_DPOINT_DIM_CONSTRAINT
| |--PRO_E_DPOINT_DIM_CONSTR_REF
| |--PRO_E_DPOINT_DIM_CONSTR_TYPE
| |--PRO_E_DPOINT_DIM_CONSTR_VAL
================================================================================
================================================================================
Element Id Element Name Data Type
================================================================================
PRO_E_FEATURE_TYPE Feature Type PRO_VALUE_TYPE_INT
PRO_E_DPOINT_TYPE Datum Point Type PRO_VALUE_TYPE_INT
PRO_E_STD_FEATURE_NAME Feature Name PRO_VALUE_TYPE_WSTRING
PRO_E_DPOINT_POINTS_ARRAY Points List Array
PRO_E_DPOINT_POINT One Point Compound
PRO_E_DPOINT_POINT_NAME Point Name PRO_VALUE_TYPE_WSTRING
PRO_E_DPOINT_PLA_CONSTRAINTS Placement Constraints Array
PRO_E_DPOINT_PLA_CONSTRAINT One Placement Constraint Compound
PRO_E_DPOINT_PLA_CONSTR_REF Placement Ref. PRO_VALUE_TYPE_SELECTION
PRO_E_DPOINT_PLA_CONSTR_TYPE Constraint Type PRO_VALUE_TYPE_INT
PRO_E_DPOINT_PLA_CONSTR_VAL Value PRO_VALUE_TYPE_DOUBLE
PRO_E_DPOINT_DIM_CONSTRAINTS Dim. Constraints Array
PRO_E_DPOINT_DIM_CONSTRAINT One Dim. Constraint Compound
PRO_E_DPOINT_DIM_CONSTR_REF Dim. Ref. PRO_VALUE_TYPE_SELECTION
PRO_E_DPOINT_DIM_CONSTR_TYPE Constraint Type PRO_VALUE_TYPE_INT
PRO_E_DPOINT_DIM_CONSTR_VAL Value PRO_VALUE_TYPE_DOUBLE
================================================================================
================================================================================
Element Id Valid Values
================================================================================
PRO_E_FEATURE_TYPE PRO_FEAT_DATUM_POINT
PRO_E_DPOINT_TYPE PRO_DPOINT_TYPE_GENERAL
PRO_E_STD_FEATURE_NAME
PRO_E_DPOINT_POINTS_ARRAY N/A
PRO_E_DPOINT_POINT N/A
PRO_E_DPOINT_POINT_NAME
PRO_E_DPOINT_PLA_CONSTRAINTS N/A
PRO_E_DPOINT_PLA_CONSTRAINT N/A
PRO_E_DPOINT_PLA_CONSTR_REF Depend on context. See below.
PRO_E_DPOINT_PLA_CONSTR_TYPE See ProDtmpntConstrType
PRO_E_DPOINT_PLA_CONSTR_VAL
PRO_E_DPOINT_DIM_CONSTRAINTS N/A
PRO_E_DPOINT_DIM_CONSTRAINT N/A
PRO_E_DPOINT_DIM_CONSTR_REF Depend on context. See below.
PRO_E_DPOINT_DIM_CONSTR_TYPE See ProDtmpntConstrType
PRO_E_DPOINT_DIM_CONSTR_VAL
================================================================================
*************************************************************************** */
/*============================================================================*/
/* */
/* PRO_E_DPOINT_PLA_CONSTR_REF */
/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
/* Valid values for the placement reference are as following: */
/* */
/* Curve - SEL_3D_CURVE, SEL_3D_CABLE, SEL_IGES_WF */
/* Edge | - SEL_3D_EDG */
/* Axis - SEL_3D_AXIS */
/* Vertex - SEL_3D_VERT or SEL_CURVE_END */
/* CSYS - SEL_3D_CSYS */
/* CSYS_AXIS - SEL_3D_CSYS_AXIS */
/* Surface - SEL_3D_SRF, SEL_3D_SRF_LIST */
/* Datum Pnt - SEL_3D_PNT */
/* */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE */
/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
/* Valid values for PRO_E_DPOINT_PLA_CONSTR_TYPE are as following: */
/* */
/* PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_DTMPNT_CONSTR_TYPE_OFFSET */
/* PRO_DTMPNT_CONSTR_TYPE_CENTER */
/* PRO_DTMPNT_CONSTR_TYPE_PARALLEL */
/* PRO_DTMPNT_CONSTR_TYPE_NORMAL */
/* PRO_DTMPNT_CONSTR_TYPE_CARTESIAN */
/* PRO_DTMPNT_CONSTR_TYPE_CYLINDRICAL */
/* PRO_DTMPNT_CONSTR_TYPE_SPHERICAL */
/* PRO_DTMPNT_CONSTR_TYPE_PROJECT */
/* */
/* PRO_E_DPOINT_DIM_CONSTR_REF */
/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
/* Valid values for the dimension references are as following: */
/* */
/* Curve - SEL_3D_CURVE, SEL_3D_CABLE, SEL_CRV_PNT, SEL_IGES_WF */
/* Edge | - SEL_3D_EDG, SEL_EDG_PNT */
/* Axis - SEL_3D_AXIS */
/* CSYS - SEL_3D_CSYS */
/* Surface - SEL_3D_SRF, SEL_SRF_PNT, SEL_3D_SRF_LIST */
/* */
/* PRO_E_DPOINT_DIM_CONSTR_TYPE */
/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
/* Valid values for PRO_E_DPOINT_DIM_CONSTR_TYPE are as following: */
/* */
/* PRO_DTMPNT_CONSTR_TYPE_OFFSET */
/* PRO_DTMPNT_CONSTR_TYPE_LENGTH */
/* PRO_DTMPNT_CONSTR_TYPE_RATIO */
/* PRO_DTMPNT_CONSTR_TYPE_LENGTH_END */
/* PRO_DTMPNT_CONSTR_TYPE_RATIO */
/* PRO_DTMPNT_CONSTR_TYPE_RATIO_END */
/* PRO_DTMPNT_CONSTR_TYPE_ALONG_X */
/* PRO_DTMPNT_CONSTR_TYPE_ALONG_Y */
/* PRO_DTMPNT_CONSTR_TYPE_ALONG_Z */
/* */
/*============================================================================*/
/*============================================================================*/
/* EXAMPLES */
/* ======== */
/* */
/* At Vertex */
/* ~~~~~~~~~ */
/* PRO_E_DPOINT_PLA_CONSTRAINTS */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Vertex */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* Offset Point */
/* ~~~~~~~~~~~~ */
/* PRO_E_DPOINT_PLA_CONSTRAINTS */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Vertex / CSys / DPnt */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_OFFSET */
/* PRO_E_DPOINT_PLA_CONSTR_VAL Offset Value */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Curve / Edge / Axis */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_PARALLEL */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* OR */
/* PRO_E_DPOINT_PLA_CONSTR_REF Surface */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_NORMAL */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* OR */
/* PRO_E_DPOINT_PLA_CONSTR_REF Csys Axis */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_PARALLEL */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* OR */
/* PRO_E_DPOINT_PLA_CONSTR_REF Csys */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_CARTESIAN or */
/* PRO_DTMPNT_CONSTR_TYPE_CYLINDRICAL or */
/* PRO_DTMPNT_CONSTR_TYPE_SPHERICAL */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* PRO_E_DPOINT_DIM_CONSTRAINT */
/* PRO_E_DPOINT_DIM_CONSTR_REF N/A */
/* PRO_E_DPOINT_DIM_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ALONG_X */
/* PRO_E_DPOINT_DIM_CONSTR_VAL Offset Value */
/* PRO_E_DPOINT_DIM_CONSTRAINT */
/* PRO_E_DPOINT_DIM_CONSTR_REF N/A */
/* PRO_E_DPOINT_DIM_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ALONG_Y */
/* PRO_E_DPOINT_DIM_CONSTR_VAL Offset Value */
/* PRO_E_DPOINT_DIM_CONSTRAINT */
/* PRO_E_DPOINT_DIM_CONSTR_REF N/A */
/* PRO_E_DPOINT_DIM_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ALONG_Z */
/* PRO_E_DPOINT_DIM_CONSTR_VAL Offset Value */
/* */
/* Note: The ALONG_X/Y/Z above would be used as : */
/* X, Y, Z when offset type is CARTESIAN; */
/* R, THETA, Z when offset type is CYLINDRICAL; */
/* RHO, PHI, THETA when offset type is SPHERICAL offsting type. */
/* */
/* */
/* Project Point */
/* ~~~~~~~~~~~~~ */
/* PRO_E_DPOINT_PLA_CONSTRAINTS */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF DPnt / Curve End / Vertex */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_PROJECT */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Axis / Curve / Edge */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* OR */
/* PRO_E_DPOINT_PLA_CONSTR_REF Surface */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* */
/* Three Surfaces */
/* ~~~~~~~~~~~~~~ */
/* PRO_E_DPOINT_PLA_CONSTRAINTS */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Surface */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Surface */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Surface */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* On/Offset Surface */
/* ~~~~~~~~~~~~~~~~~ */
/* PRO_E_DPOINT_PLA_CONSTRAINTS */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Surface */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON or */
/* PRO_DTMPNT_CONSTR_TYPE_OFFSET */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A - for ON, offset value - for OFFSET */
/* PRO_E_DPOINT_DIM_CONSTRAINTS */
/* PRO_E_DPOINT_DIM_CONSTRAINT */
/* PRO_E_DPOINT_DIM_CONSTR_REF Edge/Surface */
/* PRO_E_DPOINT_DIM_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_OFFSET */
/* PRO_E_DPOINT_DIM_CONSTR_VAL Offset Value */
/* PRO_E_DPOINT_DIM_CONSTRAINT */
/* PRO_E_DPOINT_DIM_CONSTR_REF Edge/Surface */
/* PRO_E_DPOINT_DIM_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_OFFSET */
/* PRO_E_DPOINT_DIM_CONSTR_VAL Offset Value */
/* */
/* Curve X Surface */
/* ~~~~~~~~~~~~~~~~~ */
/* PRO_E_DPOINT_PLA_CONSTRAINTS */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Curve / Axis / Edge or Surface */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Surface or Curve / Axis / Edge */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* Note: If MORE than one intersections exist - The point will be */
/* created at the intersection nearest to the curve reference */
/* t-parameter value from the ProSelection object. use */
/* ProSelectionUvParamSet() for setting it programmatically. */
/* */
/* At Curve's / Surface's Center */
/* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
/* PRO_E_DPOINT_PLA_CONSTRAINTS */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Curve / Edge / Surface (Sphere) */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_CENTER */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* Curve X Curve */
/* ~~~~~~~~~~~~~ */
/* PRO_E_DPOINT_PLA_CONSTRAINTS */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Curve / Edge / Axis */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Curve / Edge / Axis */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* */
/* Note: If MORE than one intersections exist - The point will be */
/* created at the intersection nearest to the SECOND reference */
/* t-parameter value from the ProSelection object. use */
/* ProSelectionUvParamSet() for setting it programmatically. */
/* */
/* On Curve */
/* ~~~~~~~~ */
/* PRO_E_DPOINT_PLA_CONSTRAINTS */
/* PRO_E_DPOINT_PLA_CONSTRAINT */
/* PRO_E_DPOINT_PLA_CONSTR_REF Curve / Edge/ Axis(valid with ofst pln) */
/* PRO_E_DPOINT_PLA_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_ON */
/* PRO_E_DPOINT_PLA_CONSTR_VAL N/A */
/* PRO_E_DPOINT_DIM_CONSTRAINTS */
/* [Length on Curve]: */
/* PRO_E_DPOINT_DIM_CONSTRAINT */
/* PRO_E_DPOINT_DIM_CONSTR_REF Curve (THE SAME) */
/* PRO_E_DPOINT_DIM_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_LENGTH or */
/* PRO_DTMPNT_CONSTR_TYPE_LENGTH_END */
/* PRO_E_DPOINT_DIM_CONSTR_VAL Length Value (from curve start or end) */
/* */
/* OR [Ratio on Curve]: */
/* PRO_E_DPOINT_DIM_CONSTRAINT */
/* PRO_E_DPOINT_DIM_CONSTR_REF Curve (THE SAME) */
/* PRO_E_DPOINT_DIM_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_RATIO or */
/* PRO_DTMPNT_CONSTR_TYPE_RATIO_END */
/* PRO_E_DPOINT_DIM_CONSTR_VAL Ratio Value (from curve start or end) */
/* */
/* OR [On curve, offset plane]: */
/* PRO_E_DPOINT_DIM_CONSTRAINT */
/* PRO_E_DPOINT_DIM_CONSTR_REF Surface */
/* PRO_E_DPOINT_DIM_CONSTR_TYPE PRO_DTMPNT_CONSTR_TYPE_OFFSET */
/* PRO_E_DPOINT_DIM_CONSTR_VAL Offset Value */
/* */
/* */
/* *** ADD MORE EXAMPLES *** */
/* */
/*============================================================================*/
typedef enum pro_dtmpnt_type
{
PRO_DTMPNT_TYPE_ON_SURF = 3,
PRO_DTMPNT_TYPE_ONVERTEX = 5,
PRO_DTMPNT_TYPE_OFFSET_CSYS = 6,
PRO_DTMPNT_TYPE_OFFS_SURF = 14
} ProDtmpntType;
typedef enum pro_dtmpnt_csystype
{
PRO_DTMPNT_CSYSTYPE_CARTESIAN = 0,
PRO_DTMPNT_CSYSTYPE_CYLINDRICAL = 1,
PRO_DTMPNT_CSYSTYPE_SPHERICAL = 2
} ProDtmpntCsystype;
typedef enum pro_dtmpnt_dimensions
{
PRO_DTMPNT_DIMENSIONS_WITH = 0,
PRO_DTMPNT_DIMENSIONS_WITHOUT = 47
} ProDtmpntDimensions;
/*############################################################################*/
/* The following element tree was used in release 2001 and earlier */
/* and is provided for reference purposes only. Users are advised */
/* not to use this element tree for feature creation or modification */
/* activities anymore beginning in this release. */
/*############################################################################*/
/*****************************************************************************\
Feature element tree
PRO_E_FEATURE_TREE
|
|--PRO_E_FEATURE_TYPE
|
|--PRO_E_DTMPNT_PNTS Array of PRO_E_DTMPNT_PNT
|--PRO_E_DTMPNT_PNT
|--PRO_E_DTMPNT_TYPE
if PRO_E_DTMPNT_TYPE = PRO_DTMPNT_TYPE_ONSURF
|--PRO_E_DTMPNT_PLACE_SURF
|--PRO_E_DTMPNT_DIM_REF1
|--PRO_E_DTMPNT_DIM_REF2
|--PRO_E_DTMPNT_DIM_DIST1
|--PRO_E_DTMPNT_DIM_DIST2
if PRO_E_DTMPNT_TYPE = PRO_DTMPNT_TYPE_OFFS_SURF
|--PRO_E_DTMPNT_PLACE_SURF
|--PRO_E_DTMPNT_DIM_REF1
|--PRO_E_DTMPNT_DIM_REF2
|--PRO_E_DTMPNT_DIM_DIST1
|--PRO_E_DTMPNT_DIM_DIST2
|--PRO_E_DTMPNT_OFFSET_DIST
if PRO_E_DTMPNT_TYPE = PRO_DTMPNT_TYPE_OFFSET_CSYS
|--PRO_E_DTMPNT_CSYSTYPE
|--PRO_E_DTMPNT_DIMENSIONS
|--PRO_E_DTMPNT_CSYS
|--PRO_E_DTMPNT_X
|--PRO_E_DTMPNT_Y
|--PRO_E_DTMPNT_RADIUS
|--PRO_E_DTMPNT_THETA
|--PRO_E_DTMPNT_Z
|--PRO_E_DTMPNT_PHI
if PRO_E_DTMPNT_TYPE = PRO_DTMPNT_TYPE_ONVERTEX
|--PRO_E_DTMPNT_ONV_VTX
Feature elements table
--------------------------------------------------------------------------------
Element Id Element Name Data Type Valid Values
--------------------------------------------------------------------------------
PRO_E_FEATURE_TYPE Feature Type PRO_VALUE_TYPE_INT PRO_FEAT_CURVE
PRO_E_DTMPNT_PNTS Points List Array
PRO_E_DTMPNT_PNT Point Compound
PRO_E_DTMPNT_TYPE Point Type PRO_VALUE_TYPE_INT See ProDtmpntType
PRO_E_DTMPNT_PLACE_SURF Placement Surf PRO_VALUE_TYPE_SELECTION
PRO_E_DTMPNT_DIM_REF1 Dim Ref1 PRO_VALUE_TYPE_SELECTION
PRO_E_DTMPNT_DIM_REF2 Dim Ref2 PRO_VALUE_TYPE_SELECTION
PRO_E_DTMPNT_DIM_DIST1 Ref1 Dist PRO_VALUE_TYPE_DOUBLE Any
PRO_E_DTMPNT_DIM_DIST2 Ref2 Dist PRO_VALUE_TYPE_DOUBLE Any
PRO_E_DTMPNT_OFFSET_DIST Offset Dist PRO_VALUE_TYPE_DOUBLE Any
PRO_E_DTMPNT_CSYSTYPE Csys Type PRO_VALUE_TYPE_INT See ProDtmpntCsystype
PRO_E_DTMPNT_DIMENSIONS Dimensions PRO_VALUE_TYPE_INT See ProDtmpntDimensions
PRO_E_DTMPNT_CSYS Ref Csys PRO_VALUE_TYPE_SELECTION
PRO_E_DTMPNT_X X PRO_VALUE_TYPE_DOUBLE
PRO_E_DTMPNT_Y Y PRO_VALUE_TYPE_DOUBLE
PRO_E_DTMPNT_RADIUS Radius PRO_VALUE_TYPE_DOUBLE
PRO_E_DTMPNT_THETA Theta PRO_VALUE_TYPE_DOUBLE
PRO_E_DTMPNT_Z Z PRO_VALUE_TYPE_DOUBLE
PRO_E_DTMPNT_PHI Phi PRO_VALUE_TYPE_DOUBLE
PRO_E_DTMPNT_ONV_VTX Vertex PRO_VALUE_TYPE_SELECTION
--------------------------------------------------------------------------------
\*****************************************************************************/
PRO_END_C_DECLS
#endif