#ifndef PRODRAFT_H
#define PRODRAFT_H
/*
Creo Parametric TOOLKIT declarations related to draft feature.
*/
#include <ProToolkit.h>
#include <ProDirection.h>
PRO_BEGIN_C_DECLS
/*****************************************************************************
Feature element tree
PRO_E_FEATURE_TREE
|
|--PRO_E_FEATURE_TYPE
|
|--PRO_E_STD_FEATURE_NAME
|
|--PRO_E_DRAFT_TWEAK_OR_INTERSEC
|
|--PRO_E_DRAFT_EXTEND
|
|--PRO_E_DRAFT_SPLIT
|
|--PRO_E_STD_SURF_COLLECTION_APPL
|
|--PRO_E_DIRECTION_COMPOUND
|
|--PRO_E_DRAFT_CONSTANT_OR_VARIABLE
|
|--PRO_E_STD_CURVE_COLLECTION_APPL
|
|--PRO_E_DRAFT_SPLIT_GEOM
|
|--PRO_E_STD_SECTION
| |--PRO_E_SEC_USE_SKETCH
|
|--PRO_E_DRAFT_INCLUDE_TANGENT
|
|--PRO_E_DRAFT_SIDE_1
| |--PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE_1
| |--PRO_E_DRAFT_NEUTRAL_PLANE_1
| |--PRO_E_STD_CURVE_COLLECTION_APPL
| |--PRO_E_DRAFT_DEPENDENT_1
| |--PRO_E_DRAFT_ANGLE_1
| |--PRO_E_DRAFT_ANGLES
| | |--PRO_E_DRAFT_ANG_PNT
| | |--PRO_E_STD_POINT_COLLECTION_APPL
| | |--PRO_E_DRAFT_ANGLE
| |
| |--PRO_E_DRAFT_NEUTRAL_QUILT_1
|
|--PRO_E_DRAFT_SIDE_2
|--PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE_2
|--PRO_E_DRAFT_NEUTRAL_PLANE_2
|--PRO_E_STD_CURVE_COLLECTION_APPL
|--PRO_E_DRAFT_DEPENDENT_2
|--PRO_E_DRAFT_ANGLE_2
|--PRO_E_DRAFT_ANGLES
| |--PRO_E_DRAFT_ANG_PNT
| | |--PRO_E_STD_POINT_COLLECTION_APPL
| | |--PRO_E_DRAFT_ANGLE
|
|--PRO_E_DRAFT_NEUTRAL_QUILT_2
Feature elements table
-------------------------------------------------------------------------------------
Element Id Element Name Data Type
-------------------------------------------------------------------------------------
PRO_E_FEATURE_TYPE Feature Type PRO_VALUE_TYPE_INT
PRO_E_STD_FEATURE_NAME Feature Name PRO_VALUE_TYPE_WSTRING
PRO_E_DRAFT_TWEAK_OR_INTERSEC Tweak or Intersect PRO_VALUE_TYPE_INT
- See Note 1.
PRO_E_DRAFT_EXTEND Extend PRO_VALUE_TYPE_INT
- See Note 2.
PRO_E_STD_SURF_COLLECTION_APPL Drafted Surfaces PRO_VALUE_TYPE_SELECTION
- Refer ProSrfcollection.h
PRO_E_DRAFT_SPLIT Split PRO_VALUE_TYPE_INT
PRO_E_DIRECTION_COMPOUND Direction Utility Compound
- See ProDirection.h
PRO_E_DRAFT_CONSTANT_OR_VARIABLE Constant or Variable PRO_VALUE_TYPE_INT
PRO_E_STD_CURVE_COLLECTION_APPL Exclude Loop (optional) PRO_VALUE_TYPE_SELECTION
Draft hinge(s)
- See ProCrvcollection.h
PRO_E_STD_SECTION Split Sketch (optional) Compound
- See ProStdSection.h
PRO_E_SEC_USE_SKETCH Split Sketch (optional) PRO_VALUE_TYPE_SELECTION
PRO_E_DRAFT_SPLIT_GEOM Split Geom (optional) PRO_VALUE_TYPE_SELECTION
PRO_E_DRAFT_INCLUDE_TANGENT Include Tangent PRO_VALUE_TYPE_INT
PRO_E_DRAFT_SIDE_1 1st draft's side Compound
PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE_1 Type of Draft hinge PRO_VALUE_TYPE_INT
PRO_E_DRAFT_NEUTRAL_PLANE_1 Draft hinge PRO_VALUE_TYPE_SELECTION
PRO_E_DRAFT_DEPENDENT_1 Dependence PRO_VALUE_TYPE_INT
PRO_E_DRAFT_ANGLE_1 Draft Angle (constant) PRO_VALUE_TYPE_DOUBLE
PRO_E_DRAFT_SIDE_2 1st draft's side Compound
PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE_2 Typr of Draft hinge PRO_VALUE_TYPE_INT
PRO_E_DRAFT_NEUTRAL_PLANE_2 Draft hinge PRO_VALUE_TYPE_SELECTION
PRO_E_DRAFT_DEPENDENT_2 Dependence PRO_VALUE_TYPE_INT
PRO_E_DRAFT_ANGLE_2 Draft Angle (constant) PRO_VALUE_TYPE_DOUBLE
PRO_E_DRAFT_ANGLES Draft Angles and Points Array
PRO_E_DRAFT_ANG_PNT Draft Angle and Point Compound
PRO_E_STD_POINT_COLLECTION_APPL Point for Angle PRO_VALUE_TYPE_SELECTION
- See ProCrvcollection.h
PRO_E_DRAFT_ANGLE Draft angle (variable) PRO_VALUE_TYPE_DOUBLE
PRO_E_DRAFT_NEUTRAL_QUILT_1 Hinge quilt PRO_VALUE_TYPE_SELECTION
PRO_E_DRAFT_NEUTRAL_QUILT_2 Hinge quilt PRO_VALUE_TYPE_SELECTION
-------------------------------------------------------------------------------------
Table Draft 1 : Common elements and their values
---------------------------------------------------------------------
| Element Id Valid Values |
|-------------------------------------------------------------------|
| PRO_E_FEATURE_TYPE PRO_FEAT_DRAFT |
| PRO_E_DRAFT_TWEAK_OR_INTERSEC ProDraftTweakOrIntsctOpts |
| PRO_E_DRAFT_EXTEND ProDraftExtendOpts |
| PRO_E_DRAFT_SPLIT ProDraftSplitOpts |
| PRO_E_DRAFT_CONSTANT_OR_VARIABLE ProDraftConstOrVarOpts |
| PRO_E_DRAFT_INCLUDE_TANGENT ProDraftIncludeTangentOpts |
| PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE_1 ProDraftHingeType |
| PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE_2 ProDraftHingeType |
| PRO_E_DRAFT_DEPENDENT_1 ProDraftDependenceOpts |
| PRO_E_DRAFT_DEPENDENT_2 ProDraftDependenceOpts |
---------------------------------------------------------------------
Notes :
******
Note 1. PRO_E_DRAFT_TWEAK_OR_INTERSEC option is available for features created
Pro/E Version prior to WildFire 2.0.
Note 2. PRO_E_DRAFT_EXTEND - For features created using Pro/E Version prior to
WildFire 2.0 - is available only for
PRO_E_DRAFT_TWEAK_OR_INTERSEC == PRO_DRAFT_UI_INTERSECT
Note 3. PRO_E_DRAFT_DEPENDENT_1 / _2 :: control whether corresponding side
is drafted. Depends upon the type of Draft hinge the
PRO_E_STD_CURVE_COLLECTION_APPL or if PRO_E_DRAFT_NEUTRAL_PLANE_...
is used for Draft hinge.
*/
/* Include Tangent :: PRO_E_DRAFT_INCLUDE_TANGENT */
typedef enum
{
PRO_DRAFT_UI_NOT_INC_TANG = 0, /* Not include tangrnts */
PRO_DRAFT_UI_INC_TANG = 1 /* Include tangrnts */
} ProDraftIncludeTangentOpts;
/* Constant or Variable :: PRO_E_DRAFT_CONSTANT_OR_VARIABLE */
typedef enum
{
PRO_DRAFT_UI_VARIABLE = 0, /* Variable */
PRO_DRAFT_UI_CONSTANT = 1 /* Constant */
} ProDraftConstOrVarOpts;
/* Tweak or Intersect :: PRO_E_DRAFT_TWEAK_OR_INTERSEC */
typedef enum
{
PRO_DRAFT_UI_TWEAK = 0, /* Tweak */
PRO_DRAFT_UI_INTERSECT = 1 /* Intersect */
} ProDraftTweakOrIntsctOpts;
/* Extend :: PRO_E_DRAFT_EXTEND */
typedef enum
{
PRO_DRAFT_UI_NO_EXTEND = 0, /* Intersect with Extend */
PRO_DRAFT_UI_EXTEND = 1 /* Intersect with Extend */
} ProDraftExtendOpts;
/* Split :: PRO_E_DRAFT_SPLIT */
typedef enum
{
PRO_DRAFT_UI_SPLIT_NONE = 0, /* No Split */
PRO_DRAFT_UI_SPLIT_NEUT = 1, /* Split on Draft hinge */
PRO_DRAFT_UI_SPLIT_SURF = 2, /* Split at Surface */
PRO_DRAFT_UI_SPLIT_SCTCH = 3 /* Split at Sketch */
} ProDraftSplitOpts;
/* Dependence :: PRO_E_DRAFT_DEPENDENT_1 / _2 */
typedef enum
{
PRO_DRAFT_UI_INDEPENDENT = 0, /* Side drafted independently */
PRO_DRAFT_UI_DEPENDENT = 1, /* Side drafted dependently */
PRO_DRAFT_UI_NONE = 2 /* Side is not drafted */
} ProDraftDependenceOpts;
/* Type of Draft hinge :: PRO_E_DRAFT_NEUTRAL_OBJECT_TYPE_1 / _2 */
typedef enum
{
PRO_DRAFT_UI_NO_NEUT = 0, /* None, use draft hinge for an other side */
PRO_DRAFT_UI_PLANE = 1, /* Plane */
PRO_DRAFT_UI_CURVE = 2, /* Curve */
PRO_DRAFT_UI_QUILT = 3,
PRO_DRAFT_UI_RND_HINGE = 4
} ProDraftHingeType;
PRO_END_C_DECLS
#endif